KH-570改性107硅橡胶的紫外光固化行为及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

青岛农业大学高层次人才启动基金(6631334)


UV Curing Behaviors and Property of Silicone Rubber Modified with KH-570
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用γ-甲基丙烯酰氧丙基三甲氧基硅烷(KH-570)、二端羟基二甲基聚硅氧烷(107硅橡胶)为原料,盐酸作为催化剂,在水与甲苯混合体系中制备了一系列含有丙烯酰氧基团的硅氧烷预聚体,探讨了原料质量比例、原料黏度大小对制备硅氧烷预聚体的光固化行为的影响。利用红外光谱、热失重分析等手段对硅氧烷预聚体及光固化后产物进行了表征,结果表明,制备的硅氧烷预聚体外观无色透明澄清,黏度可调,具有优异的紫外光(UV)固化特性,同时固化后产物具有较高的热稳定性,其5%热失重温度均高于300℃;同时研究了合成硅氧烷预聚体在UV固化有机硅压敏胶中的应用。

    Abstract:

    The silicon rubber with acryloyl group was synthesized by condensation reaction between KH-570 and 107 silicone rubber using HCl as catalyst. The influence of the reaction conditions (mass ratio, and viscosity) on the curing effect was investigated. And the products were characterized by FT-IR, TGA, and other techniques. It is demonstrated that the viscosity of the prepolymer and curing effect can be regulated by changing the reaction conditions. The resulting products after UV curing have high thermal stability,and 5% mass loss temperature is higher than 300 ℃. Acrylate monomers were used to modify the UV curing pressure sensitive adhesive based on the synthesized silicon rubber. The quantity of acrylates plays an important role in prepared pressure sensitive adhesive (PSA) of silicon containing acrylate.

    参考文献
    相似文献
    引证文献
引用本文

李海银,潘 维. KH-570改性107硅橡胶的紫外光固化行为及性能[J].高分子材料科学与工程,2015,31(2):93-97. Haiyin Li, Wei Pan. UV Curing Behaviors and Property of Silicone Rubber Modified with KH-570[J]. Polymer Materials Science & Engineering,2015,31(2):93-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司