聚二甲基硅氧烷/苯基MDQ 硅树脂杂化体系的流变特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广西有色金属及特色材料加工重点实验室开放课题


Rheological Properties of Polydimethylsiloxane /Phenyl-Substituted MDQ Silicon Resin Hybrids
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用哈克旋转流变仪对聚二甲基硅氧烷(PDMS)和苯基MDQ/PDMS杂化体系的流变性能进行研究,结果表明,在低剪切速率,PDMS和苯基MDQ/PDMS杂化体系均表现出牛顿流体行为,当剪切速率增加至某临界值γc 时,PDMS和苯基MDQ/PDMS杂化体系均表现出剪切变稀现象;增加苯基MDQ 硅树脂含量会导致γc 值减小,升高温度则使γc值增大;PDMS和苯基MDQ/PDMS杂化体系的黏度与温度之间的关系可用Arrhenius方程进行描述,计算结果显示,与PDMS相比,杂化体系具有更高的流动活化能。

    Abstract:

    The rheological properties of polydimethylsiloxane (PDMS)/phenyl-substituted MDQ silicon resin hybrids and PDMS were analyzed by Haake rheometer. The results show that, Newtonian behavior can be observed in both PDMS and PDMS/phenyl-substituted MDQ silicon resin hybrids at low shear rate. However, shear thinning behavior is observed in all samples when the shear rate reaches a critical value γc. The γc values decrease when increasing the content of phenyl-substituted MDQ silicon resins and increases along with the raising temperature. The relation of temperature and viscosity can be evaluated using the Arrhenius model. Meanwhile, calculation results indicate that hybrids reprent higher activation energy than PDMS.

    参考文献
    相似文献
    引证文献
引用本文

黄计锋,葛建芳,梁伟杰,张发爱.聚二甲基硅氧烷/苯基MDQ 硅树脂杂化体系的流变特性[J].高分子材料科学与工程,2015,31(2):103-107. Jifeng Huang, Jianfang Ge, Weijie Liang, Fa'ai Zhang. Rheological Properties of Polydimethylsiloxane /Phenyl-Substituted MDQ Silicon Resin Hybrids[J]. Polymer Materials Science & Engineering,2015,31(2):103-107.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司