膨胀单体改性液态光学胶的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省省部产学研项目(2012B091100433);全国大学生创新项目(201310564122,201210564178);华南农业大学“211工程”三期重点建设项目(2009B010100001)


Preparation of Modified Liquid Optical Clear Adhesives Containing Spiro-Orthocarbonate Expanding Monomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以三羟甲基丙烷单烯丙基醚和原碳酸四乙酯为原料制备了一种透明且含有双键的膨胀单体3,9-二乙基-3,9丙烯氧甲基-1,5,7,11-四氧杂螺[5,5]十一烷(SOC),使用傅里叶变换红外光谱、核磁共振氢谱对产物结构进行了表征。通过热稳定性、附着力、凝胶率和体积收缩率测试等分析方法,探讨了SOC加入量对液态光学胶性能的影响。结果表明,胶粘剂UV固化后的附着力和凝胶率随膨胀单体的加入先增加后减少,但热稳定性持续降低。当膨胀单体加入量为10%~15%时,胶粘剂体系无体积收缩且胶粘剂具有优异的综合性能。

    Abstract:

    Expanding monomer 3,9-diethyl-3,9-bis(allyoxymethy)-1,5,7,11-tetraxaspiro[5,5] undecane(SOC) was synthesized with trimethylolpropane ally ether and tetraethoxymethane, of which structure was characterized via FT-IR and 1H-NMR spectrum. The influence of adding SOC expanding monomer into liquid optical clear adhesives at different ratios was discussed by measuring the volumetric shrinkage, adhesion strength, thermal stability and gel fraction. The results show that the adhesion strength and gel fraction of the adhesives after UV-curing increase as the content of SOC increases, but decrease in an over addition of SOC. However, the thermal stability decreases along with increasing the SOC content. When the SOC content is 10%~15%, the adhesion system gets zero volumetric shrinkage and excellent comprehensive properties.

    参考文献
    相似文献
    引证文献
引用本文

孙金媛,黄家健,周华俊,叶杰欣,刘小平,杨卓鸿.膨胀单体改性液态光学胶的制备及性能[J].高分子材料科学与工程,2015,31(2):155-159. Jinyuan Sun, Jiajian Huang, Huajun Zhou, Jiexin Ye, Xiaoping Liu, Zhuohong Yang. Preparation of Modified Liquid Optical Clear Adhesives Containing Spiro-Orthocarbonate Expanding Monomer[J]. Polymer Materials Science & Engineering,2015,31(2):155-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司