溶喷法制备纤维素非织造布
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家973项目(2012CB724610);十二五科技支撑计划(2011BAE11B02);国家自然科学基金(21364012,21263024)


Preparation of Fiber Nonwovens Fabrics by Solution-Blown
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将纤维素浆粕溶解于N-甲基吗啉-N-氧化物(NMMO)中,并采用溶喷法,制备了一种全新的溶喷纤维素非织造布。考察了制备工艺对非织造布物理性能的影响,认为制备过程中模头温度和热风风速和温度是影响纤维直径和非织造布拉伸性能的主要因素。对产品的微观形貌、表观密度和拉伸性能等进行了测试。结果表明,非织造布的纤维网络结构完整,缺陷较少;非织造布的纤维直径3~20μm,表观密度122~180g/cm3,弹性模量1.25~9.15MPa,物理性能较好。

    Abstract:

    Dissolving cellulose pulp in N-methyl morpholine-N-oxide (NMMO), solution-blowing fiber nonwovens fabrics were prepared by melt-blown technology. The effects of the preparation technology for physical properties of nonwoven fabrics were examined. The die temperature and hot air speed and temperature are the main factors on fiber diameter and tensile properties of nonwoven fabrics in preparation process. The microstructure, apparent density and tensile properties of the product were tested. The results show that this type of nonwovens has relatively complete fiber network structure and less defect; the nonwoven fiber diameter is 3~20 μm, apparent density 122~180 g/cm3, elastic modulus 1.25~9.15 MPa.

    参考文献
    相似文献
    引证文献
引用本文

李春花,徐纪刚,程春祖,韩 晖,王荣民.溶喷法制备纤维素非织造布[J].高分子材料科学与工程,2015,31(2):165-170. Chunhua Li, Jigang Xu, Chunzu Cheng, Hui Han, Rongmin Wang. Preparation of Fiber Nonwovens Fabrics by Solution-Blown[J]. Polymer Materials Science & Engineering,2015,31(2):165-170.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司