两亲性改性剂聚丙烯接枝聚乙烯基吡咯烷酮的制备及对聚丙烯微孔膜结构和亲水性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Amphiphilic Modifier Polyvinyl Pyrrolidoneand Grafted Polypropylene and Its Influence on the Structure and Hydrophilicity of Polypropylene Microporous Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融接枝法制备两亲性改性剂聚丙烯接枝聚乙烯吡咯烷酮(PP-g-PVP),热致相分离法制备聚丙烯亲水微孔膜。利用元素分析仪测定了PP-g-PVP的接枝率,采用接触角测定仪、场发射扫描电子显微镜和旋转流变仪对聚丙烯亲水微孔膜进行了测试和研究。结果显示,两亲性改性剂PP-g-PVP的接枝率和接枝效率分别是16.44%和56.78%;制成的聚丙烯亲水微孔膜亲水性有明显提高,由不润湿状态转为润湿状态,且在短时间内水滴可以较快地铺平;在降温过程中,液-液相分离到结晶的时间缩短,导致亲水膜的孔径减小,可以有效地阻隔污染物的通过。

    Abstract:

    In this work, a new type of surface modifying copolymer polyvinyl pyrrolidoneand grafted polypropylene (PP-g-PVP) was synthesized and a hydrophilic microporous membrane comprising PP and PP-g-PVP was prepared via thermally induced phase separation method. The surface modifier and the hydrophilic membrane obtained were characterized by water contact angle , field emission scanning electron microscope and rotational rheometer. It is found that the degree of grafting (DG) and the efficiency of grafting (EG) could reach 16.44% and 56.78%, respectively. The surface hydrophilicity of the membrane is significantly improved, from non-wetting to wetting, and water droplet could becomes flat quickly. Adding modifier into membrane recipe also reduces the temperature gap between the liquid-liquid phase separation and the crystallization, resulting in a smaller pore size and, therefore, better filtration performance.

    参考文献
    相似文献
    引证文献
引用本文

陶国良,倪 唐,朱兆奇,夏艳平,马文中.两亲性改性剂聚丙烯接枝聚乙烯基吡咯烷酮的制备及对聚丙烯微孔膜结构和亲水性能的影响[J].高分子材料科学与工程,2015,31(2):171-175. Guoliang Tao, Tang Ni, Zhaoqi Zhu, Yanping Xia, Wenzhong Ma. Preparation of Amphiphilic Modifier Polyvinyl Pyrrolidoneand Grafted Polypropylene and Its Influence on the Structure and Hydrophilicity of Polypropylene Microporous Membrane[J]. Polymer Materials Science & Engineering,2015,31(2):171-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司