原位聚合法制备具有长链支化的三元乙丙橡胶
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


EPDM with Long-Chain Branched Structures via In-Situ Solution Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用铁系催化剂制备了具有1,2-结构的聚丁二烯,然后在钒系催化剂存在下进行乙烯和丙烯共聚合,原位合成了以聚丁二烯为第3单体的三元乙丙橡胶。并使用核磁氢谱、傅里叶变换红外光谱、三检测器系统凝胶渗透色谱联用仪和热重分析仪对所得的聚合物进行了表征。结果表明,聚丁二烯的质量大于1.0g时,催化剂聚合活性缓慢降低。随着聚丁二烯用量的增加,相对分子质量增大,相对分子质量分布变宽。VOClsub>3-Alsub>2(Csub>2Hsub>5)sub>3Clsub>3-ETCA 催化体系中,当n(Al)/n(V)=60,nETCA)/n(V)=15时,以聚丁二烯作为第3单体具有最高的聚合活性。新型三元乙丙橡胶中既含有可用于硫化的双键,又具有一定量的长链支化结构,具有潜在的工业应用前景。

    Abstract:

    Using Fe-based catalyst to prepare polybutadiene(PBD) with 1, 2 - structure, and then copolymerization behaviors of ethylene and propylene where the vanadium catalyst existed, in-situ synthesized ethylene-propylene-diene monomer(EPDM) with the polybutadiene as the third monomer. The polymer was characterized by 1H-NMR, FT-IR, MALTI-angle laser light scattering/GPC and TGA. The results show that when the dosage of the polybutadiene is greater than 1.0 g,the catalyst activity becomes slow down slowly. With increase of the polybutadiene dosage, the relative molecular weight increases and relative molecular weight distribution is widened. In the VOClsub>3-Alsub>2(Csub>2Hsub>5)sub>3Clsub>3-ETCA catalytic system, when n(Al)/n(V)=60, n(ETCA)/n(V)=15, the polybutadiene as the third monomer tools makes it show the highest polymerization activity. The new EPDM with PBD as the third monomer not only contains a certain amount of double bonds suitable for vulcanization, but also has branched molecular structure, indicating the significance in the practical application.

    参考文献
    相似文献
    引证文献
引用本文

姚 伟,陈 斌,姚钰玉,庄 锐,张春雨,那丽华,代全权,张学全.原位聚合法制备具有长链支化的三元乙丙橡胶[J].高分子材料科学与工程,2015,31(3):17-21. Wei Yao, Bin Chen, Yuyu Yao, Rui Zhuang, Chunyu Zhang, Lihua Na, Quanquan Dai, Xuequan Zhang. EPDM with Long-Chain Branched Structures via In-Situ Solution Polymerization[J]. Polymer Materials Science & Engineering,2015,31(3):17-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司