未处理聚丙烯涂饰用丙烯酸聚合物乳液的合成及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Characterization of Acrylic Polymer Emulsion for Untreated Polypropylene Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸异冰片酯(iBOA)、丙烯酸丁酯(BA)、甲基丙烯酸正丁酯(BMA)、丙烯酸(AA)为单体,通过半连续种子乳液聚合法合成了一种可直接在未处理聚丙烯(PP)表面涂饰的核壳型丙烯酸聚合物乳液。探讨了聚合反应条件、AA和iBOA用量对乳液性能的影响;采用透射电镜、差示扫描量热分析和粒径分析等测试技术表征了乳胶粒的结构,并以表面张力和接触角等分析了乳液在未处理聚丙烯基材上的润湿性和附着力。研究结果表明,AA用量越多,乳胶粒核壳结构越明显;iBOA的加入使得乳液表面张力降低约10 mN/m,接触角降低约8°;随着iBOA用量增加,乳液在未处理PP基材上的附着力有了明显的提高。

    Abstract:

    A core-shell polymer emulsion for coating directly on untreated polypropylene was synthesized by the method of semi-continuous seeded emulsion polymerization, with isobornyl acrylate(iBOA), butyl acrylate(BA), N-butyl methacrylate(BMA) and acrylic acid(AA) as monomers. The effects of polymerization condition, the content of AA and iBOA on properties of the emulsion were discussed. The structure of the latex particle was investigated by TEM, DSC and particle size analyzer, and the wettability and adhesion of the emulsion on untreated polypropylene were also studied in terms of the surface tension and contact angle. The results show that the core-shell structure of the latex particle becomes clearer with increase of the AA content. The introduction of iBOA decreases the surface tension of emulsion by about 10mN/m and the contact angle by about 8°. Furthermore, with increase of the iBOA content, the adhesion of emulsion on untreated polypropylene is obviously improved.

    参考文献
    相似文献
    引证文献
引用本文

林晓琼, 夏正斌, 雷亮, 杨涛.未处理聚丙烯涂饰用丙烯酸聚合物乳液的合成及表征[J].高分子材料科学与工程,2015,31(3):32-36. Xiaoqiong Lin, Zhengbin Xia, Liang Lei, Tao Yang. Synthesis and Characterization of Acrylic Polymer Emulsion for Untreated Polypropylene Coating[J]. Polymer Materials Science & Engineering,2015,31(3):32-36.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司