结晶结构及固相热处理对聚苯硫醚摩擦性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273118);四川省科技支撑计划项目(2013FZ0006)


Effect of Crystal Structure and Heat Treatment in Solid Phase on the Frictional and Wear Properties of Polyphenylene Sulfide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对注塑聚苯硫醚(PPS)试样在不同条件下进行固相热处理,研究材料结晶结构对材料摩擦行为和性能的影响,利用差示扫描量热法及广角X射线衍射讨论了固相热处理对聚苯硫醚结晶行为的影响,利用环-块式摩擦磨损试验机研究了材料的摩擦磨损性能。结果表明,结晶结构对PPS摩擦性能具有重要影响,经固相热处理后PPS结晶度较未处理试样提高约118%,磨损率降低96.8%,摩擦系数由0.58降低至0.45,摩擦稳定性明显提高,且其磨损机理由非晶区软化造成的大面积粘着磨损较转变为以犁切和点蚀为主的磨粒磨损和疲劳磨损。

    Abstract:

    Polyphenylene sulfide (PPS) samples with the different crystallinity were prepared by controlling the temperature and time of heat treatment in solid phase. And the friction and wear properties of the PPS samples were investigated through a ring-on-block frictional tester. The crystallization behavior of the samples was discussed by differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(XRD). The results show that the crystallinity and crystal structure have significant effect on the friction and wear properties of PPS. The crystallinity of PPS samples treated at 120 ℃ for 2 h is 118% higher than that of the untreated one. And the wear rate decreases by 96.8%, and the friction coefficient reduces from 0.58 to 0.45. The main wear mechanism of PPS heated at higher temperature (270 ℃) is abrasive and fatigue wear.

    参考文献
    相似文献
    引证文献
引用本文

罗维, 李茂源, 葛亚宁, 洪义强, 邹华维, 梁梅.结晶结构及固相热处理对聚苯硫醚摩擦性能的影响[J].高分子材料科学与工程,2015,31(3):37-41. Wei Luo, Maoyuan Li, Yaning Ge, Yiqiang Hong, Huawei Zou, Mei Liang. Effect of Crystal Structure and Heat Treatment in Solid Phase on the Frictional and Wear Properties of Polyphenylene Sulfide[J]. Polymer Materials Science & Engineering,2015,31(3):37-41.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司