PVC/α MSAN/ABS共混物的力学性能与形态结构
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Mechanical Properties and Morphology of PVC/α-MSAN/ABS Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融共混的方法将聚氯乙烯(PVC)树脂、α-甲基苯乙烯-丙烯腈共聚物(α-MSAN)和丙烯腈-丁二烯-苯乙烯接枝共聚物(ABS)共混,通过改变共混物的组成,制备了一系列不同橡胶含量和基体组成的PVC/α-MSAN/ABS共混物,研究了共混物的力学性能及形变机理。结果发现,随着基体树脂中PVC含量的增加,共混物的冲击韧性显著提高,而拉伸强度逐渐降低,同时促使共混物发生脆韧转变所需的橡胶含量逐渐减少。形态结构研究表明,由于基体树脂链缠结密度的增加,共混物的形变机理逐渐由银纹向剪切屈服转变,进而导致体系韧性的增加。

    Abstract:

    By melt blending polyvinyl chloride (PVC), α-methyl styrene-acrylonitrile copolymer (α-MSAN) and acrylonitrile-butadiene-styrene (ABS), a series of PVC/α-MSAN/ABS ternary blends with the different rubber content and matrix composition were obtained, and the mechanical properties and deformation mechanisms of PVC/α-MSAN/ABS blends were studied. It is found that increase of the PVC content in matrix results in a continuous increase of the impact strength and an obvious decrease of tensile strength, while the brittle-ductile transition of the blends shifts to lower rubber content. The morphology results show that there exist a transition in the deformation mechanism from crazing to shear yielding with increase of chain entanglement density of the matrix, resulting in the toughness of blends improved.

    参考文献
    相似文献
    引证文献
引用本文

宋立新, 王翔, 任建楠, 任亮, 张明耀, 张会轩. PVC/α MSAN/ABS共混物的力学性能与形态结构[J].高分子材料科学与工程,2015,31(3):46-49. Lixin Song, Xiang Wang, Jiannan Ren, Liang Ren, Mingyao Zhang, Huixuan Zhang. Mechanical Properties and Morphology of PVC/α-MSAN/ABS Blends[J]. Polymer Materials Science & Engineering,2015,31(3):46-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司