Abstract:In order to get small size polycarbonate particles that can be applied to granular material photo-elastic experiment, polycarbonate plate or bar was used as raw materials, to produce millimeter transparency particles through the three kinds of processing methods and annealing curves from our research. Then by analyzing the experimental results of mechanical properties, optical properties and mercury injection, obtained the change laws of stress-strain curve, material fringe value and the internal pore structure characteristics. The results show that the influence of thermal radiation should be considered in addition to the heat treatment temperature and time in the annealing process, and annealing does not significantly change the mechanical properties of polycarbonate material and curve shape, only has a slight effect on the aperture size, distribution, porosity and other internal structure characteristics of polycarbonate. At the same time, it can basically eliminate the stripe error caused by the parts size.