基于在线粒径分析技术的微胶囊成囊过程分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省部产学研项目(2012B091100442)


Application of In-Situ Particle Size Analytical Technology for Investigation of the Encapsulation Process of MicroPCMs
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过原位聚合法,以不同相对分子质量的苯乙烯马来酸酐共聚物水溶液(SMAH)为分散剂,石蜡为芯材,三聚氰胺甲醛(MF)树脂为壳材制备了石蜡微胶囊。利用聚焦光束反射测量仪在线检测了体系的粒径分布及不同粒径范围的粒子数,微胶囊样品形貌采用扫描电镜表征。通过研究认为,微胶囊在成囊过程中,三聚氰胺甲醛树脂预聚体先在溶液中形成小粒子,小粒子被石蜡表面的分散剂吸附并沉积于石蜡液滴表面,缩聚形成壳层。SMAH分散剂的相对分子质量越大,其分散能力越强,得到的微胶囊平均粒径越小,粒径分布较窄。

    Abstract:

    Microencapsulated phase change materials (MicroPCMs) based on paraffin core and melamine-formaldehyde (MF) resin shell were synthesized by in situ polymerization using styrene-maleic anhydride copolymer solutions(SMAH) with different molecular weight as dispersants. Focused beam reflectance measurement (FBRM) was used to in-situ monitor the granule diameter distributions and FBRM spectra during the fabrication process of microPCMs. According to the results of FBRM and SEM analysis, a microencapsulation forming model was developed. During fabrication of the shell, MF prepolymer particles are formed as soon as MF prepolymers are dropped into the aqueous solution, which are adsorbed and then aggregated on the surface of the core droplets. The effect of molecular weight of SMAH emulsifier on the size distribution of microPCMs was also studied. It is indicated that higher molecular weight of SMA emulsifier leads to a smaller granule diameter and narrower granule diameter distribution.

    参考文献
    相似文献
    引证文献
引用本文

徐梦漪, 刘莹, 林书乐, 周亮.基于在线粒径分析技术的微胶囊成囊过程分析[J].高分子材料科学与工程,2015,31(3):106-111. Mengyi Xu, Ying Liu, Shule Lin, Liang Zhou. Application of In-Situ Particle Size Analytical Technology for Investigation of the Encapsulation Process of MicroPCMs[J]. Polymer Materials Science & Engineering,2015,31(3):106-111.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司