酶解木质素改性酚醛泡沫塑料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

甘肃省科技支撑计划项目(1304FKCA089)


Preparation and Performance of Enzymatic Hydrolysis Lignin-Modified Phenolic Foam
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用碱性水溶液萃取法,从酶解玉米秸秆残渣中提取到酶解木质素,然后用酶解木质素替代部分苯酚,成功研制得到酶解木质素改性酚醛树脂及其泡沫塑料。对酶解木质素改性酚醛树脂的机理及改性酚醛泡沫的表面形貌和性能进行了研究。结果表明,提取的酶解木质素具有典型的草本类木质素结构,其首先与苯酚发生缩合反应,生成的中间产物再与甲醛反应,从而成功地对酚醛树脂进行了改性。相对于普通酚醛泡沫,酶解木质素改性酚醛泡沫表面平整光滑、泡孔均匀,具有更好的力学性能和较低的掉渣率,克服了普通酚醛泡沫质脆易碎、容易掉渣的缺点,而其吸水性和保水性没有受到显著影响。

    Abstract:

    Enzymatic hydrolysis lignin (EHL) was separated from cornstalks residue by alkaline aqueous extraction method, and then EHL-modified phenol-formaldehyde resin as well as phenolic foam was prepared successfully with EHL replacing part phenol. The mechanism of EHL modifying phenol-formaldehyde resin and the surface morphology, performance of the modified phenolic foam were investigated. Results show that the extracted EHL has typical structure of wood lignin, and the phenol-formaldehyde resin is modified successfully by the following procedure: firstly, EHL reacts with phenol, and then the resulting intermediate product condenses with formaldehyde. As compared to the normal phenolic foam, EHL-modified phenolic foam has smooth and clean surface with uniform aperture, improved mechanical property, and less foam debris. Therefore, the shortages as low strength, brittleness and frangibility, and much debris of normal phenolic foam have been improved by modifying the phenolic foam with EHL, while there is no much influence on water absorption and water retention.

    参考文献
    相似文献
    引证文献
引用本文

赵丽斌, 冯利邦, 易增博, 朱大鹏.酶解木质素改性酚醛泡沫塑料的制备与性能[J].高分子材料科学与工程,2015,31(3):138-141. Libin Zhao, Libang Feng, Zengbo Yi, Dapeng Zhu. Preparation and Performance of Enzymatic Hydrolysis Lignin-Modified Phenolic Foam[J]. Polymer Materials Science & Engineering,2015,31(3):138-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司