棉花纳米纤维素增强木塑复合材料
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Wood Plastic Composites Reinforced with Cotton Cellulose Nanofibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用棉花纳米纤维素(CNF)增强木塑复合材料(WPC),首先以脱脂棉为原料,结合酸碱处理和机械处理的方法制备出CNF,然后通过挤出成型制备了木粉/高密度聚乙烯(HDPE)/ CNF复合材料。挤出成型前,先将木粉和HDPE粉末加入到CNF悬浮液中加热搅拌进行预混合,以避免CNF在HDPE基体中的团聚。结果表明,利用预混合处理制备的WPC的抗弯强度和弹性模量都有明显的提高;WPC的热膨胀系数也出现一定程度的降低,但是降低的效果并不明显;从场发射扫描电子显微镜照片发现,CNF以三维网状细丝结构穿刺于塑料和木粉中,表明取得了理想的分散和增强效果。

    Abstract:

    Cotton cellulose nanofibers(CNF) was used to reinforce wood plastic composites. Firstly CNF was extracted from absorbent cotton by chemical and mechanical treatments, and then the wood flour/HDPE/CNF composites were prepared by extruding molding. In order to solve the aggregation problem of CNF in the HDPE matrix, the mixture of wood flour and HDPE powder was added into the CNF slurry with continuously stirring at high temperature before extruding molding. The results indicate that compared to the directly blending, the bending strength (MOR) and bending modulus (MOE) of composites adding cotton CNF through the preblending treatment are improved evidently. The coefficient of thermal expansion of the composites with CNF shows a decline trend, but the decline effect is not significant. Field emission scanning electron microscope (FE-SEM) images show that CNF is entangled with wood flour and the HDPE matrix, forming three-dimensional network structure, and an ideal dispersion and reinforcing effect achieved.

    参考文献
    相似文献
    引证文献
引用本文

李晶晶, 宋湛谦, 李大纲, 商士斌, 郭勇.棉花纳米纤维素增强木塑复合材料[J].高分子材料科学与工程,2015,31(3):142-146. Jingjing Li, Zhanqian Song, Dagang Li, Shibin Shang, Yong Guo. Wood Plastic Composites Reinforced with Cotton Cellulose Nanofibers[J]. Polymer Materials Science & Engineering,2015,31(3):142-146.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-03-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司