Abstract:The graphite oxide was prepared from expansible graphite by the modified Hummers method, and the samples were characterized by XRD, UV-vis and TEM. Graphite oxide/waterborne polyurethane (GO/WPU) nanocomposites were fabricated by in-situ emulsion. The effect of the GO content on the stability, fracture morphologies, thermal degradation and flame retardant properties of GO/WPU composites was investigated by zeta potential analyzer, SEM, TGA and cone calorimeter. The results of zeta potential and SEM analysis indicate that GO has a good stability and dispersibility in GO/WPU nanocomposites. TGA results show that the thermostability of GO/WPU nanocomposites decreases slightly compared to that of pure WPU, but the carbon residue increases from 0.99% to 2.90% when the mass fraction of GO in WPU is 2%. Cone calorimeter test indicates that the flame retardant and smoke suppression properties of GO/WPU composites increase with increasing of the GO content. When the mass fraction of GO is 2%, the peak heat release rate, total heat release, total smoke release and smoke factor decrease by 34%, 19%, 27%, and 43% respectively compared to those of pure WPU.