有机蒙脱土/环氧树脂复合改性沥青的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(U1162120)


Properties of Organic Montmorillonite/Epoxy Resin Composite Modified Asphalt
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以有机蒙脱土(OMMT)和环氧树脂为改性剂,采用反应性熔融共混法制备了OMMT/环氧树脂复合改性沥青。通过X射线衍射和荧光显微镜对复合改性沥青的微观结构进行了表征,对其物理力学性能、相容性和热贮存稳定性进行了考察。结果表明,当OMMT掺加量为1%~2%时,OMMT以剥离结构存在于复合改性沥青中,体系中环氧树脂分布更加均匀;复合改性沥青中OMMT掺量为1%时,拉伸强度与环氧树脂改性沥青相比提高了25%;随着OMMT掺量的增加,复合改性沥青软化点逐渐升高,25 ℃针入度缓慢减小,针入度指数(PI)先增大后减小。

    Abstract:

    The composite modified asphalt was prepared via reactive melt blending process using organic montmorillonite (OMMT) and epoxy resin as modifying agent. The microstructure and morphology of OMMT/epoxy resin composite modified asphalt were characterized by X-ray diffraction (XRD) and fluorescent microscope (FM), respectively. The physical-mechanical property, compatibility and thermal storage stability of the composite modified asphalt were investigated. The results indicate that the OMMT is dispersed in the composite modified asphalt with an exfoliated structure when the content of OMMT is between 1% and 2%, and the epoxy resin is distributed more uniformly in the composite modified asphalt. The tensile strength of composite modified asphalt increases by 25% compared with epoxy resin modified asphalt when the addition of OMMT is 1%. Further, the softening point of OMMT/epoxy resin composite modified asphalt increases, the penetration of 25 ℃ decreases slightly, and the penetration index (PI) rises first and then declines with increasing OMMT content.

    参考文献
    相似文献
    引证文献
引用本文

晏英, 肖新颜, 刘武, 张登科.有机蒙脱土/环氧树脂复合改性沥青的性能[J].高分子材料科学与工程,2015,31(4):52-56. Ying Yan, Xinyan Xiao, Wu Liu, Dengke Zhang. Properties of Organic Montmorillonite/Epoxy Resin Composite Modified Asphalt[J]. Polymer Materials Science & Engineering,2015,31(4):52-56.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司