Abstract:A kind of thermally conductive and electrically insulating composite was obtained from mixture of hexagonal boron nitride flakes (h-BN), silicon carbide whiskers (SiCw) and polysulfone (PSF) by melt blending via a two roll mixing mill, and then samples were prepared by compression molding. Morphology, thermally conductive property and electrically insulating property were characterized by scanning electron microscopy (SEM), thermal conductivity analysis instrument and high resistance micro-current tester. The results indicate that the binary fillers are dispersed homogeneously and thermally conductive networks are formed in polymeric matrix. A striking synergistic effect on thermal conductivity of composite is achieved at a suitable h-BN/SiCw mass ratio. With increasing the hybrid fillers content, the thermal conductivity of composites are increased gradually, but the surface resistivity and the volume resistivity are decreased. When the filler content is up to 50% with the h-BN/SiCw mass ratio of 8/2, the thermal conductivity of h-BN/SiCw/PSF composite is up to 2.728 W/(m·K), and the surface resistivity and the volume resistivity are 5.21×1013 Ω and 7.86×1013 Ω·cm, respectively.