旋转挤出制备具有偏离轴向杂化串晶结构的聚丙烯管
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51127003,51121001)


Polypropylene Pipe with Hybrid Shish Kebab off Axial Direction via Rotation Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统挤出加工聚丙烯(PP)管环向强度差的问题,将成核剂自成纤及旋转挤出技术引入PP管加工,利用稀土类β型成核剂WBG独特的自组装行为在PP管挤出过程中形成纤维结构并诱导β晶在纤维表面附生生长,通过芯棒旋转调控自成纤成核剂偏离轴向排列。X射线衍射、差示扫描量热分析、偏光显微镜和扫描电镜观察证实PP管内形成大量β型杂化串晶,且其偏离轴向排列。因此,采用该方法制备的PP管环向强度可达33.9 MPa,较传统挤出PP管的19.4 MPa,提高了74.7%。

    Abstract:

    In this paper, self- fibrillation of nucleating agent was introduced into rotation extrusion to prepare polypropylene (PP) pipe with high hoop strength. By means of X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarized light microscope (PLM) and scanning electron microscope (SEM) testing, it is showed that nucleating agent firstly self-assembles into the fibers and their direction deviates from the axial direction during rotation extrusion. Subsequently, due to good matching lattice of nucleating agent and PP, PP crystals tend to grow on the surface of the fibrous nucleating agent so as to form anisotropic hybrid shish kebab. As a result, the hoop strength of PP pipe is enhanced greatly, increased by 74.7% compared to that of the convention-extruded PP pipe, 19.4 MPa.

    参考文献
    相似文献
    引证文献
引用本文

皮林, 聂敏, 韩锐, 王琪.旋转挤出制备具有偏离轴向杂化串晶结构的聚丙烯管[J].高分子材料科学与工程,2015,31(4):113-116. Lin Pi, Min Nie, Rui Han, Qi Wang. Polypropylene Pipe with Hybrid Shish Kebab off Axial Direction via Rotation Extrusion[J]. Polymer Materials Science & Engineering,2015,31(4):113-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司