环氧树脂含量对废旧ABS塑料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划资助项目(2014BAC03B06)


Effects of Epoxy Resin Content on Properties of Recycled ABS Plastics
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    环氧树脂ADR-4370S是一种含有缩水甘油酯型环氧基团的扩链剂。文中采用ADR-4370S,经双螺杆挤出机对废旧ABS(R-ABS)进行扩链,通过力学性能测试、熔体流动速率测试、傅里叶变换红外光谱、凝胶渗透色谱研究了ADR-4370S对R-ABS结构与性能的影响。此外还通过索氏提取法分析了ADR-4370S对R-ABS凝胶含量的影响。研究表明,ADR-4370S的加入改善了R-ABS的力学性能,当ADR-4370S用量为0.7 phr时,R-ABS的综合力学性能最佳,缺口冲击强度达到6.33 kJ/m2;熔体流动速率测试表明,R-ABS的熔融指数随着ADR-4370S含量的增加而降低;凝胶渗透色谱测试表明,ADR-4370S的加入使R-ABS的相对分子质量提高,相对分子质量分布变窄。

    Abstract:

    Epoxy resin ADR-4370S is a kind of chain extender which contains glycidyl ester type epoxy groups. In this article, ADR-4370S was chosen as chain extender and the extended R-ABS were prepared by twin-screw extruder. The effects of the ADR contents on the structure and properties of products were characterized by mechanical property testing, melt mass-flow rate testing(MFR) testing, Fourier transform infrared spectrometry(FT-IR),gel permeation chromatography (GPC). Soxhlet extractor was used to analyze the gel content. The results indicate that the addition of ADR improves the mechanical properties of R-ABS, the best comprehensive mechanical properties of R-ABS are obtained when the ADR-4370S content is 0.7 phr, and the notch impact strength rises up to 6.33 kJ/m2; melt mass-flow rate testing shows that the melt index decreases as the increase of ADR-4370S content; gel permeation chromatography testing demonstrates that the molecular weight increases and the molecular weight distribution narrows as the increase of ADR-4370S content.

    参考文献
    相似文献
    引证文献
引用本文

王嘉, 尚辉良, 李迎春, 宋江锋, 贺茂勇, 宋晶晶, 李曦.环氧树脂含量对废旧ABS塑料性能的影响[J].高分子材料科学与工程,2015,31(4):133-136. Jia Wang, Huiliang Shang, Yingchun Li, Jiangfeng Song, Maoyong He, Jingjing Song, Xi Li. Effects of Epoxy Resin Content on Properties of Recycled ABS Plastics[J]. Polymer Materials Science & Engineering,2015,31(4):133-136.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司