密胺甲醛树脂包覆改性聚磷酸铵
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Modification of Ammonium Polyphosphate with Melamine Formaldehyde Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将聚磷酸铵(APP) 热活化后与三聚氰胺(MEL)进行反应得到接枝MEL的APP(MAPP),进一步用甲醛交联制得密胺 甲醛树脂包覆改性的APP(MFAPP)。扫描电镜、红外光谱及热重分析结果表明,改性后APP的表面被成功地包覆上了密胺 甲醛树脂,改性APP的起始分解温度从190 ℃升高到了245 ℃;研究MEL用量对MFAPP水溶性以及阻燃性能的影响表明,改性后APP的水溶性大幅下降,阻燃性能得到提高。当MEL的质量为APP的8%时,MFAPP的溶解度达到最低,此时70PP/30MFAPP的极限氧指数(LOI)为28%,70PP/20MFAPP/10PER的LOI值达到了35.0%;进一步研究改性对APP与聚丙烯(PP)相容性的影响,结果表明,PP/MFAPP拉伸性能优于PP/APP。

    Abstract:

    Melamine-formaldehyde resin coated ammonium polyphosphate(MFAPP) was prepared by reacting thermal activated ammonium polyphosphate(APP) with melamine to obtain melamine-grafted ammonium polyphosphate(MAPP) and further crosslinking MAPP with formaldehyde. The results of SEM, FT-IR prove the formation of melamine-formaldehyde resin on the surface of APP, and the thermal gravimetric analysis(TGA) result reveals a rise of the initial decomposition temperature of APP after modification from 190 ℃ to 245 ℃. The influence of the MEL dosage on the water solubility and flame retarding ability of MFAPP was investigated. The results show a drastic drop in the water solubility and an enhancement in the flame retarding ability of APP after modification. When the dosage of MEL is 8% of APP, the water solubility of MFAPP reaches the lowest and the limiting oxygen index (LOI) of 70PP/30MFAPP and 70PP/20MFAPP/10PER composites reaches 28% and 35.0%, respectively. The influence of modification on the compatibility between PP and APP was also studied, and it turnes out that the PP/MFAPP composites have better tensile properties compared to PP/APP.

    参考文献
    相似文献
    引证文献
引用本文

朱健生, 纪利俊, 陈葵, 武斌, 朱家文.密胺甲醛树脂包覆改性聚磷酸铵[J].高分子材料科学与工程,2015,31(4):163-167. Jiansheng Zhu, Lijun Ji, Kui Chen, Bin Wu, Jiawen Zhu. Modification of Ammonium Polyphosphate with Melamine Formaldehyde Resin[J]. Polymer Materials Science & Engineering,2015,31(4):163-167.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司