甲基丙烯酸原位改性丁腈橡胶/谷壳灰复合发泡涂层
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21276121);江西省自然科学基金资助项目(20122BAB203021)


Nitrile-Butadiene Rubber/Rice Husk Ash Composite Foamed Coatings In-Situ Modified with Methacrylic Acid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以农业废弃物谷壳灰(RHA)为填料,采用液态共混工艺,即将有机溶剂溶解的NBR生胶、谷壳灰和其他助剂混合形成混合胶液制备丁腈橡胶(NBR)/RHA复合发泡涂层,在混合胶液中添加甲基丙烯酸(MAA)对NBR/RHA复合发泡涂层进行原位改性。研究了MAA的用量对RHA分散性、RHA与NBR界面结合性、NBR/RHA复合发泡涂层泡孔形貌、力学性能、耐溶剂性能及热学性能的影响。结果表明,MAA作为界面改性剂,可改善RHA的分散性,增强RHA与NBR相的界面作用,改变NBR/RHA复合发泡涂层的泡孔形貌,对NBR/RHA复合发泡涂层具有补强效果。当MAA用量为10phr时,NBR/RHA复合发泡涂层的力学性能、耐流体性能、热学性能等较佳。

    Abstract:

    Rice husk ash(RHA), which is an agricultural waste, was used as filler to prepare nitrile -butadiene rubber (NBR)/RHA composite foamed coatings. The coatings were prepared through liquid blending process, namely dissolved raw NBR, RHA and other ingredients were mixed in solvent so as to form mixed rubber solution. Simultaneously, the coatings were in-situ modified by adding methacrylic acid(MAA) in blending rubber solution. Furthermore, the effects of MAA contents on dispersity of RHA, interface bonding between RHA and NBR matrix, and cell morphology, mechanical properties, resistance to fluid and thermal properties of NBR/RHA composite foamed coatings were investigated. The results show that the dispersity of RHA together with interface interaction between RHA and NBR matrix is improved, coatings are reinforced, and foam cell morphology is changed by adding interface modifier MAA. When 10 phr MAA is added, the mechanical properties, resistance to fluid and thermal properties of NBR/RHA composite foamed coatings are superior.

    参考文献
    相似文献
    引证文献
引用本文

郑楠, 刘杰, 邱祖民, 何维娟.甲基丙烯酸原位改性丁腈橡胶/谷壳灰复合发泡涂层[J].高分子材料科学与工程,2015,31(4):174-179. Nan Zheng, Jie Liu, Zumin Qiu, Weijuan He. Nitrile-Butadiene Rubber/Rice Husk Ash Composite Foamed Coatings In-Situ Modified with Methacrylic Acid[J]. Polymer Materials Science & Engineering,2015,31(4):174-179.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司