核壳型苯丙乳液的冻融稳定性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Freeze-Thaw Stability of Styrene-Acrylate Emulsion with Core-Shell Structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用半连续乳液聚合法,引入可聚合乳化剂,制备了软核硬壳、硬核软壳以及均相共聚共3种具有不同粒子结构形态的苯丙乳液。考察了乳化剂类型和配比、聚合物玻璃化转变温度(Tg)、乳胶粒子结构形态及含羧基功能单体用量对乳液冻融稳定性的影响,并提出了乳液冻融稳定的机理,阐明了上述因素的作用原理。结果表明,引入可聚合乳化剂、功能单体的羧基化改性均有利于乳液冻融稳定性的提高;与硬核软壳和均相共聚2种粒子结构相比,软核硬壳更有利于改善乳液的冻融稳定性,且壳层Tg越高,对应乳液的冻融稳定性越好。

    Abstract:

    Introducing polymerizable emulsifiers, styrene-acrylate emulsions with latex particles of three different morphology structures were prepared by semi-continuous emulsion polymerization. The effects of emulsifiers, glass transition temperature (Tg) of copolymer, morphology structure of latex particles and methacrylic acid (MAA) content on the freeze-thaw (F/T) stability of latex were studied. Then a freeze-thaw stabilization mechanism was proposed and the interaction principle of above mentioned factors was elucidated based on the mechanism. The results show that introduction of polymerizable emulsifiers and carboxylation of the carboxyl groups are beneficial to improving the F/T stability of emulsion. It is also clarified that compared to latex particles with hard core/soft shell structure or homogeneous structure, latex particles with soft core/hard shell structure are propitious to the F/T stability of emulsion and the F/T cycles of emulsion increase with increase of Tg of shell polymer.

    参考文献
    相似文献
    引证文献
引用本文

杨之卓, 沈慧芳, 沈大谱, 刘薇薇.核壳型苯丙乳液的冻融稳定性[J].高分子材料科学与工程,2015,31(5):25-31. Zhizhuo Yang, Huifang Shen, Dapu Shen, Weiwei Liu. Freeze-Thaw Stability of Styrene-Acrylate Emulsion with Core-Shell Structure[J]. Polymer Materials Science & Engineering,2015,31(5):25-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司