木质素磺酸钙/聚乙烯醇共混体系的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Structure and Properties of Lignosulfonate Calcium / Polyvinyl Alcohol Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为发展环境友好高分子材料,制备了聚乙烯醇(PVA)与木质素磺酸钙(HLS)的共混材料,研究了HLS对PVA热性能与力学性能的影响以及甘油对HLS/PVA共混薄膜的增塑改性作用。结果表明,HLS与PVA具有较强的相互作用和较好的相容性,可提高PVA的强度和热稳定性、降低PVA的结晶度,25%(质量分数,下同)HLS可使PVA的拉伸强度和热稳定性分别提高165%和20 ℃;甘油对HLS/PVA复合膜起增塑作用,使复合膜的玻璃化转变温度、熔点、结晶度和拉伸强度降低,30%甘油增塑HLS/PVA复合膜具有较好的综合性能,热稳定性比PVA高10 ℃,拉伸强度和断裂伸长率分别为4762 MPa和 621.64%。

    Abstract:

    In order to develop environment-friendly polymer materials, blend materials of polyvinyl alcohol (PVA) and lignosulfonate calcium (HLS) were prepared. The effects of HLS on the thermal and mechanical properties of PVA films and the plasticizing effect of glycerol on HLS/PVA blend films were studied. It has been found that strong interactions and good compatibility occur in HLS / PVA blends. HLS improves the strength and thermal stability of PVA and reduces the crystallinity. 25% HLS improves the tensile strength and thermal stability of PVA by 165% and 20 ℃, respectively; glycerol plays a typical plasticizer role in HLS / PVA blends suggested by the decreasing glass transition temperature, melting point, crystallinity, tensile strength and thermal stability; 30% glycerol plasticized blend shows good comprehensive properties. The thermal stability is 10 ℃ higher than that of pure PVA, and its tensile strength and elongation at break are 47.62 MPa and 621.64%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

姜黎, 叶德展, 张明华, 张熙.木质素磺酸钙/聚乙烯醇共混体系的结构与性能[J].高分子材料科学与工程,2015,31(5):32-38. Li Jiang, Dezhan Ye, Minghua Zhang, Xi Zhang. Structure and Properties of Lignosulfonate Calcium / Polyvinyl Alcohol Blends[J]. Polymer Materials Science & Engineering,2015,31(5):32-38.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司