γ射线辐照处理对聚丙烯腈纤维预氧化反应的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国科学院知识创新工程“新锐计划”项目资助;国家自然科学基金资助项目(10905088);上海市自然科学基金资助项目(15ZR1448600)


Effect of γ-Ray Irradiation on the Pre-Oxidation of Polyacrylonitrile Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用γ射线在真空下对聚丙烯腈(PAN)原丝进行辐照处理,研究辐照处理对其预氧化反应的影响。通过凝胶含量测定表明,PAN纤维主要发生交联,200 kGy时凝胶含量达到80%。联合差示扫描量热仪和傅里叶变换红外光谱仪考察辐照交联对PAN纤维预氧化过程的影响,并考察不同预氧化程度PAN纤维的力学性能。研究结果表明,γ射线辐照处理能有效降低PAN纤维预氧化反应的起始温度(~30 ℃),显著缓和预氧化过程的放热行为;同时,辐照处理还可有效降低预氧化温度,加速预氧化进程。

    Abstract:

    To investigate the irradiation effect on the preoxidation reactions, polyacrylonitrile(PAN) fibers were irradiated by gamma rays in vacuum at room temperature. The gel fraction analysis indicates that irradiation mainly induces crosslinking on PAN fibers and the gel content is 80% at the dose of 200kGy. The subsequent effect of irradiation on the preoxidation reactions was analyzed by differential scanning calorimeter (DSC), Fourier transform infrared spectroscopy (FT-IR). The tensile strength of the preoxidized PAN fibers was also studied. The results indicate that radiation pretreatment reduces the initiation temperature by 30 ℃ and moderates the exothermic behavior of preoxidation reactions obviously. From these results, it is concluded that irradiation pretreatment could accelerate preoxidation process and lower preoxidation temperature.

    参考文献
    相似文献
    引证文献
引用本文

刘伟华, 王谋华, 张文发, 张文礼, 吴国忠.γ射线辐照处理对聚丙烯腈纤维预氧化反应的影响[J].高分子材料科学与工程,2015,31(5):51-55. Weihua Liu, Mouhua Wang, Wenfa Zhang, Wenli Zhang, Guozhong Wu. Effect of γ-Ray Irradiation on the Pre-Oxidation of Polyacrylonitrile Fibers[J]. Polymer Materials Science & Engineering,2015,31(5):51-55.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司