石蜡/高密度聚乙烯/膨胀石墨导热增强型复合相变材料热导率的影响因素
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金(11176025);四川省教育厅重大培育项目(14CZ0011);四川省科技创新苗子工程重大项目(2014-14);西南科技大学研究生创新基金(14ycx021)


Thermal Conductivity of Paraffin/HDPE/ Expanded Graphite Phase Change Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融共混法制备导热增强型石蜡/高密度聚乙烯(HDPE)/膨胀石墨(EG)复合相变材料(PCM),进行扫描电镜、热重、差示扫描量热表征和性能测试,并探讨热导率的影响因素。结果表明,复合相变材料中,石蜡、HDPE和EG相容性良好,其中石蜡作为相变材料,HDPE是支撑材料,EG是导热填料。HDPE和石蜡配比一定时,复合相变材料热导率随EG含量的增加而增加;EG含量固定时,随HDPE和石蜡质量比的增加而降低。当石蜡含量为66.7%时,相变焓高达150.2 J/g,与计算值接近。

    Abstract:

    The paraffin/high density polyethylene (HDPE)/expanded graphite (EG) phase change materials (PCM) with high thermal conductivity were prepared by melt blending method. Microstructure, thermal property and enthalpy of the composites were studied by SEM, TG, DSC, and factors affecting the thermal conductivity were explored. The results show that paraffin as phase change material, HDPE as support material, and EG as thermally conductive filler could be uniformly mixed. The thermal conductivity of the PCM is increased with increasing of the EG content when the mass ratio of HDPE and paraffin is constant. When the EG content is constant, the thermal conductivity of the PCM is decreased with increasing of the mass ratio of HDPE and paraffin. The phase change enthalpy of PCM is 150.2 J/g when the paraffin content is 66.7%, which is near to the calculated value.

    参考文献
    相似文献
    引证文献
引用本文

刘菁伟, 杨文彬, 田本强, 张凯, 范敬辉, 范瑛.石蜡/高密度聚乙烯/膨胀石墨导热增强型复合相变材料热导率的影响因素[J].高分子材料科学与工程,2015,31(5):83-86. Jingwei Liu, Wenbin Yang, Benqiang Tian, Kai Zhang, Jinghui Fan, Ying Fan. Thermal Conductivity of Paraffin/HDPE/ Expanded Graphite Phase Change Composite[J]. Polymer Materials Science & Engineering,2015,31(5):83-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司