纳米压印抗蚀剂变形行为的分子动力学计算
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50975227,31370944)


Molecular Dynamics Calculation of Resist Deformation Behavior in Nanoimprint
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了提高纳米压印的成型质量,采用粗粒化分子动力学方法,研究纳米压印中抗蚀剂的变形行为。计算模型包括线宽结构的硅模具,聚甲基丙烯酸甲酯(PMMA)聚合物薄膜以及硅基板。模型的x,y方向采用周期性边界条件,z方向采用非周期性边界条件。分析不同压印条件下,模具所需要的压印力及不同区域抗蚀剂密度的变化。结果表明,随着模具槽宽的增大,压印温度的上升,在下压过程中所需要的压印力逐渐减小;在脱模初始阶段,模具和抗蚀剂之间的相互作用力出现阶跃式的递减;下压阶段,抗蚀剂局部密度增加;脱模阶段,抗蚀剂出现回弹现象。

    Abstract:

    In order to improve the quality of nanoimprint replica, coarse-grained molecular dynamics simulation was conducted to study the resist deformation behavior in nanoimprint lithography. Calculation model includes a silicon mold with line width structures, amorphous PMMA film and silicon substrate. Periodic boundary condition was used in x and y direction and non-periodic condition was used in z direction. The effects of mold line width and temperature were considered in this paper. The needed imprint force, the change of the resist density and the deformation of polymer molecular chains were analyzed. The results show that the loading force decreases with increase of the temperature and mold line width. In the initial stage of holding and unloading processes, the force decreases rapidly in a step-like way. The local density of the resist increases during stamping process. The spring-back phenomenon appears during unmolding stage.

    参考文献
    相似文献
    引证文献
引用本文

李世泽, 魏正英, 杜军, 唐一平, 楚华丽.纳米压印抗蚀剂变形行为的分子动力学计算[J].高分子材料科学与工程,2015,31(5):105-110. Shize Li, Zhengying Wei, Jun Du, Yiping Tang, Huali Chu. Molecular Dynamics Calculation of Resist Deformation Behavior in Nanoimprint[J]. Polymer Materials Science & Engineering,2015,31(5):105-110.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司