尼龙6湿热老化寿命预测
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51133005)


Service Life Prediction of Nylon 6 Under Hydrothermal Ageing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以尼龙6为研究对象,首先基于Arrhenius模型预测其在单一温度老化因子条件下的使用寿命,进一步将Arrhenius模型与Eyring反应论模型相结合,引入湿度因子,研究建立尼龙6湿热老化寿命预测模型。研究发现,随老化温度降低,尼龙6热氧降解活化能(Ea)降低,即降解机理发生改变;存在一个临界温度,在该温度以下湿度引起的水解降解不占主导地位;经实验验证,尼龙6湿热老化寿命模型预测效果较好。

    Abstract:

    The time temperature superposition method based on Arrhenius model was applied to predict the service life of nylon 6 with single temperature aging factor. In addition, the combination of Eyring model and Arrhenius model was further used to predict the service life of nylon 6 at different temperatures and humidity by introducing humidity aging factor, and the service life prediction model under hydrothermal ageing for nylon 6 was established. The results show that the thermal-oxidative degradation activation energy (Ea) declines with decrease of the ageing temperature, indicating of the change of degradation mechanism. There is a critical temperature below which the hydrolytic degradation doesn′t dominate. The service life prediction model of nylon 6 under hydrothermal ageing is proved to be effective by ageing experiments.

    参考文献
    相似文献
    引证文献
引用本文

高立花, 叶林.尼龙6湿热老化寿命预测[J].高分子材料科学与工程,2015,31(5):111-114. Lihua Gao, Lin Ye. Service Life Prediction of Nylon 6 Under Hydrothermal Ageing[J]. Polymer Materials Science & Engineering,2015,31(5):111-114.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司