双环戊二烯与乙烯醋酸乙烯酯共聚物原位聚合共混
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省杰出人才创新基金项目(074200510019)


Polymerization-Blending of Dicyclopentadiene with Ethylene-Vinyl Acetate Copolymer in Situ
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用拟反应注射成型(RIM)工艺,在经典开环易位催化体系下,将溶有乙烯-醋酸乙烯酯共聚物(EVA)的双环戊二烯(DCPD)进行原位聚合共混,制备了PDCPD/EVA复合材料,从而对PDCPD进行增韧。考察了EVA的相对分子质量及添加量对DCPD聚合反应和复合材料力学性能的影响,运用扫描电镜、差示扫描量热分析、热重分析等对聚合物进行了表征,研究了复合材料的微观形貌、力学性能以及热性能。结果表明,EVA与PDCPD能形成半互穿网络结构,EVA的引入显著提高了材料的冲击性能,其中,EVA用量为5%时冲击性达到最高,可提高85%,拉伸和弯曲强度略有下降,同时材料的热稳定性也有所提高,热分解温度提高了4.2 ℃,PDCPD/EVA的冲断面呈现韧性断裂。

    Abstract:

    By means of reaction injection molding(RIM), polydicyclopentadiene/ethylene-vinyl acetate copolymer(PDCPD/EVA) composite was prepared for toughening PDCPD by in-situ polymerization-blending of dicyclopentadiene(DCPD) and EVA, using the classical catalytic system of ring-opening metathesis polymerization. The influence of EVA molecular weight and content on polymerization activity and mechanical properties of polymer composites were investigated. The obtained polymer composites were characterized through SEM, DSC,TG and so on, and studied the microstructure, mechanical properties and thermal properties. The results reveal that EVA and PDCPD form semi-interpenetrating polymer networks structure. The addition of EVA significantly improves the impact resistance of material, especially when all EVA content rises to 5%, the impact strength reaches the maximum which increases by 85% comparing with PDCPD, tensile strength and flexural strength decrease slightly; and the composite has good thermal stability, the thermal decomposition tempreture increases 4.2 ℃. The impact fracture shows a ductile fracture.

    参考文献
    相似文献
    引证文献
引用本文

郭萌, 李旭阳, 赫玉欣, 高喜平, 张玉清.双环戊二烯与乙烯醋酸乙烯酯共聚物原位聚合共混[J].高分子材料科学与工程,2015,31(5):115-120. Meng Guo, Xuyang Li, Yuxin He, Xiping Gao, Yuqing Zhang. Polymerization-Blending of Dicyclopentadiene with Ethylene-Vinyl Acetate Copolymer in Situ[J]. Polymer Materials Science & Engineering,2015,31(5):115-120.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司