聚乳酸反应接枝甲基丙烯酸缩水甘油酯及其增容作用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家级林业科技成果推广项目([2012]19号)


Preparation of Poly(Lactic Acid) Grafted with Glycidyl Methacrylate Through Reactive Extrusion and Its Compatibilization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融反应挤出法制备聚乳酸接枝甲基丙烯酸缩水甘油酯(PLA-g-GMA)用于增容聚乳酸/杨木粉(PLA/WF)复合材料;通过核磁共振氢谱和红外光谱对PLA-g-GMA的结构进行了分析,通过力学性能测试、扫描电镜和动态热机械分析对复合材料进行了表征。结果表明,随着增容剂含量的增加,复合材料的拉伸强度和弯曲强度逐渐提高,相比未增容材料的强度最大可分别提高31%和21%;扫描电镜结果显示PLA-g-GMA能增强PLA与WF的界面相互作用,复合材料拉伸断面的空洞和间隙逐渐减少。动态力学分析结果显示随着PLA-g-GMA用量的增加,材料中PLA相的玻璃化转变温度呈下降的趋势。

    Abstract:

    Poly(lactic acid)-graft-glycidyl methacrylate (PLA-g-GMA) prepared by melt blending was used to compatibilize poly(lactic acid)/wood flour (PLA/WF) composites. The structure of PLA-g-GMA was investigated by sup>1H-nuclear magnetic resonance (sup>1H-NMR) and Fourier transform infrared spectroscopy (FT-IR), and the composites were characterized by mechanical testing, scanning electron microscope (SEM) and dynamic mechanical analysis (DMA). The results show that with increasing the PLA-g-GMA content ,the tensile strength and flexural strength increase by 31% and 21% respectively compared to composites without PLA-g-GMA. Micromorphologic investigation reveals the interfacial adhesion between PLA and WF phase is improved by the introduction of PLA-g-GMA, and cavities and gaps on tensile fracture surface are diminished gradually. The results of DMA analysis reveal that the glass transition temperature of PLA phase in composites trends to decrease with increasing the content of PLA-g-GMA.

    参考文献
    相似文献
    引证文献
引用本文

谢振华, 储富祥, 王春鹏, 金立维.聚乳酸反应接枝甲基丙烯酸缩水甘油酯及其增容作用[J].高分子材料科学与工程,2015,31(5):125-128. Zhenhua Xie, Fuxiang Chu, Chunpeng Wang, Liwei Jin. Preparation of Poly(Lactic Acid) Grafted with Glycidyl Methacrylate Through Reactive Extrusion and Its Compatibilization[J]. Polymer Materials Science & Engineering,2015,31(5):125-128.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司