静电纺丝法制备聚丙烯酰胺/壳聚糖-聚乙烯醇双极膜
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省科技厅重点项目( 2012H0019); 福州市科技局项目(2012-G-116);福建省自然科学基金资助项目(2013J01034)


Preparation of the Anionic Polyacrylamide /Chitosan-Polyvinyl Alcohol Bipolar Membrane Through Electrospinning Technique
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用静电纺丝技术制备了聚丙烯酰胺(APAM)/壳聚糖(CS)-聚乙烯醇(PVA)纳米纤维双极膜(NFBPM),并用扫描电镜、接触角测定仪等对制备的双极膜进行了表征。研究结果表明,与用流延法制备的双极膜相比,采用静电纺丝法制备的APAM/ CS-PVA NFBPM的纳米纤维阴、阳离子交换膜层的亲水性、离子交换容量、离子迁移性能等均得到提高,膜阻抗和槽电压明显降低。当电流密度为60 mA/cm2时,以其作为隔膜的电槽电压仅为6.1V,低于用流延法制备的APAM/CS-PVA双极膜(BPM)的电槽电压(8.6 V)。

    Abstract:

    The electrospinning technique was used to prepare the anionic polyacrylamide(APAM)/ chitosan (CS)- polyvinyl alcohol (PVA) nanofiber bipolar membrane (NFBPM), which was characterized by SEM, contact angle measurement and so on. The experiment results show that compared with the APAM/CS-PVA bipolar membrane (BPM) prepared by casting method, the hydrophilicities, ion exchange capacities and ion migration properties of the cation and anion exchange membrane layers for NFBPM are all improved, and the membrane impedance and cell voltage of the APAM /CS-PVA NFBPM are obviously decreased. When the current density is 60 mA/cm2, the voltage of cell using APAM/CS-PVA NFBPM as diaphragm is only 6.1 V, which is lower than that of APAM/CS-PVA BPM (8.6V).

    参考文献
    相似文献
    引证文献
引用本文

陈晓, 陈丽金, 陈日耀, 郑曦, 陈震.静电纺丝法制备聚丙烯酰胺/壳聚糖-聚乙烯醇双极膜[J].高分子材料科学与工程,2015,31(5):154-158. Xiao Chen, Lijin Chen, Riyao Chen, Xi Zheng, Zhen Chen. Preparation of the Anionic Polyacrylamide /Chitosan-Polyvinyl Alcohol Bipolar Membrane Through Electrospinning Technique[J]. Polymer Materials Science & Engineering,2015,31(5):154-158.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司