N-苯基马来酰亚胺-马来酸酐的合成及对尼龙6耐热性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

贵州省科学技术基金([2013]2122);贵州省科技计划项目([2010]5005);贵州省自然科学基金项目([2012]2123)


Synthesis of N-Phenylmaleimide-Maleic Anhydride Copolymer and Its Effect on Structure and Properties of PA6
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用溶液聚合法合成了一种耐热改性剂N-苯基马来酰亚胺-马来酸酐二元共聚物(NMA)。采用红外光谱对其结构进行表征,并通过熔融共混法制备了尼龙6/N-苯基马来酰亚胺-马来酸酐共混物(PA6/NMA),且通过扫描电镜、差示扫描量热分析、热重分析、热变形试验机及旋转流变仪对共混物耐热性能进行研究。红外光谱分析证实NMA中N-苯基马来酰亚胺(N-PMI)含量随N-PMI投料量的增加而增加;差示扫描量热分析和热重分析表明经NMA改性后的PA6的熔融温度与结晶度下降,热稳定性大幅提高;随着NMA中N-PMI含量降低,共混物热变形温度及力学性能先降低后升高;扫描电镜与旋转流变测试均表明PA6与NMA两相间的粘合作用随N-PMI含量的降低而增大。

    Abstract:

    N-phenylmaleimide-maleic anhydride copolymers(NMA) were synthesized by solution polymerization and the structure of the copolymer was characterized through FT-IR. Nylon 6/N-phenylmaleimide-maleic anhydride(PA6/NMA) blends were prepared by melt blending method. The structure and properties of blends were investigated by SEM, DSC, TGA, heat distortion tester and rotational rheometer. FT-IR confirms that the N-PMI content in NMA increases with increment of N-PMI feeding amount; DSC and TGA show that the melting temperature and crystallinity decrease, the thermal stability of PA6 increases after NMA modified; the heat distortion temperature and mechanical properties of blends decrease first and then increase with decrease of N-PMI content; SEM and rotational rheometer confirm that the adhesion of PA6 and NMA increases with decrement of N-PMI content.

    参考文献
    相似文献
    引证文献
引用本文

张景中, 何敏, 慈书亭, 刘典新, 于杰, 鲁圣军, 刘一春. N-苯基马来酰亚胺-马来酸酐的合成及对尼龙6耐热性能的影响[J].高分子材料科学与工程,2015,31(6):22-26. Jingzhong Zhang, Min He, Shuting Ci, Dianxin Liu, Jie Yu, Shengjun Lu, Yichun Liu. Synthesis of N-Phenylmaleimide-Maleic Anhydride Copolymer and Its Effect on Structure and Properties of PA6[J]. Polymer Materials Science & Engineering,2015,31(6):22-26.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司