水润滑橡胶轴承用氯磺化聚乙烯的耐介质性及摩擦磨损性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

大连科技计划项目(2011A15GX027);中央高校基本科研业务专项资金资助(3132014323)


Medium Resistance and Tribological Property of Chlorosulfonated Polyethylene for Water-Lubricated Rubber Bearing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了不同交联体系制备的氯磺化聚乙烯(CSM)的耐水、耐油性能,并以CSM为基体制备了水润滑橡胶轴承,研究了在海水润滑介质中,橡胶轴承的摩擦磨损性能,同时与丁腈橡胶(NBR)耐水耐油和摩擦磨损性能进行了对比。结果表明,不同交联体系制备的CSM,显示出优异的耐水、耐油性能,并且均明显优于NBR;在变速、变载荷的实验条件下,CSM制备的橡胶轴承的摩擦系数、磨损量绝大多数工况下均小于NBR橡胶轴承,显示出优异的摩擦磨损性能,是替代NBR制备水润滑橡胶轴承的理想基体材料。

    Abstract:

    The water and oil resistance of chlorosulfonated polyethylene (CSM) with four formulas were studied, and the friction and wear properties of water lubricated rubber bearings, made of CSM as matrix, in sea water were also investigated in detail. Nitrile rubber (NBR) was used as the comparison sample. The results demonstrate that the water and oil resistance of CSMs with all formula are much better than those of NBR. Moreover, CSM rubber bearings perform quite excellent friction and wear properties in sea water with different rotational speeds and loads: in the vast majority of cases, the values of friction coefficient and abrasion loss of CSM rubber bearing are lower than those of NBR. Therefore, NBR would be completely replaced by CSM as matrix to prepare water lubricated rubber bearings.

    参考文献
    相似文献
    引证文献
引用本文

廖明义, 励琦彪.水润滑橡胶轴承用氯磺化聚乙烯的耐介质性及摩擦磨损性能[J].高分子材料科学与工程,2015,31(6):66-71. Mingyi Liao, Qibiao Li. Medium Resistance and Tribological Property of Chlorosulfonated Polyethylene for Water-Lubricated Rubber Bearing[J]. Polymer Materials Science & Engineering,2015,31(6):66-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-06-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司