环氧树脂增强氨基聚丁二烯/氨基丁腈的低温性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Performance of Epoxy Resin Reinforced Amine-Terminated Poly-Butadiene/Amine-Terminated Butadiene Acrylonitrile at Low Temperature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用环氧树脂、氨基聚丁二烯(ATB)和氨基丁腈(ATBN)、三乙烯四胺制备了软段含量从59%至82%的ATB/ATBN系列试样。利用动态力学分析、应力应变、扫描电镜等方法研究了系列试样的低温性质,并且在恒应变下进行了动态力学分析验证。结果表明,环氧树脂与ATB/ATBN能在广泛的比例反应,具有两相结构。软段Tg不随软段含量变化,而硬段Tg随硬段含量变化。ATB系列在宽温域模量为一个平台,在低温(可达-70 ℃)仍能保持弹性材料的特征。环氧增强的ATB和ATBN都可以作为低温弹性材料使用。

    Abstract:

    A series of the amine-terminated poly-butadiene /amine-terminated butadiene acrylonitrile(ATB/ATBN) samples with the soft segment content from 59% to 82% were prepared on the basis of E-51, ATB, ATBN and triethylenetetramine. The DMA, SEM, strain-stress were used to study properties of the samples at low temperature. The results show that epoxy resin and ATB/ATBN can react in a wide range of proportion, with two phase structure. The Tg of soft segment does not change with soft segment content, but the Tg of hard segment changes with hard segment content. The modulus is a platform in the wide temperature range of ATB samples,and it can still maintain characteristics of elastic material at low temperatures (up to -70 ℃). ATB and ATBN can be used as elastic material at low temperature.

    参考文献
    相似文献
    引证文献
引用本文

王红, 王丽, 陈庆民.环氧树脂增强氨基聚丁二烯/氨基丁腈的低温性能[J].高分子材料科学与工程,2015,31(6):81-86. Hong Wang, Li Wang, Qingmin Chen. Performance of Epoxy Resin Reinforced Amine-Terminated Poly-Butadiene/Amine-Terminated Butadiene Acrylonitrile at Low Temperature[J]. Polymer Materials Science & Engineering,2015,31(6):81-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-06-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司