氧气等离子体处理对芳砜纶纤维表面性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市科委纤维界面处理技术成果转化平台项目(12TXGCCX01900)


Effect of Oxygen Plasma Treatment on Surface Modification of Polysulfonamide Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用等离子体在氧气环境对芳砜纶(PSA)纤维进行表面改性。分析纤维改性前后断裂强度、摩擦性能和润湿性能的变化。用场发射扫描电子显微镜和X射线光电子能谱仪分析纤维表面的形貌和化学元素变化。结果表明,等离子处理后的芳砜纶纤维,断裂强度变化较小,摩擦性能增强,润湿性能有大幅度提高;纤维表面随处理时间延长粗糙度增加,纤维表面碳元素含量下降、氧元素含量增加,纤维表面极性基团增加。

    Abstract:

    The surface of polysulfonamide (PSA) fiber was modified by oxygen plasma. The breaking strength, friction performance and wettability of fiber between before and after surface modification were analyzed. The surface morphology and chemical composition of fiber were evaluated by field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectrometer (XPS). The results show that after plasma treatment, the breaking strength of PSA fiber is slightly changed, the friction performance is increased and wettability is greatly improved; with increase of the treatment duration, the surface roughness is increased, carbon element and oxygen element are decreased and increased respectively, and polar groups on surface are increased.

    参考文献
    相似文献
    引证文献
引用本文

彭浩凯, 郑帼.氧气等离子体处理对芳砜纶纤维表面性能的影响[J].高分子材料科学与工程,2015,31(6):122-125. Haokai Peng, Guo Zheng. Effect of Oxygen Plasma Treatment on Surface Modification of Polysulfonamide Fiber[J]. Polymer Materials Science & Engineering,2015,31(6):122-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-06-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司