Abstract:To achieve a porous polylactic acid(PLA) microstructure, high filling content NaCl/PLA and NaCl/PEO/PLA blends were prepared by high speed internal mixing and then subjected to thorough leaching to achieve the porous morphology. The influence of processing parameters, e.g. blends formula and mixing speed, on cell morphology, porosity and thermal stability was investigated, and sequentially characterized by SEM, DSC and XRD. The results indicate that the system porosity arises with increase of the NaCl filling content, and PEO addition significantly improves the system pore interconnectivity. The increase of polyethylene oxide (PEO) content in blends shows positive influence on the increase of PLA pore interconnectivity, which therefore limit the system crystallinity. In clear contrast, increasing the mixing speed improve both pore interconnectivity and bulk crystallinity of the PLA structure. Finally, an optimal processing condition is proposed with a blend formula of mass fraction of 80% NaCl and 10% PEO at a mixing speed of 700 r/min.