直链端羧基聚酯酰胺树脂增韧改性环氧树脂
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点基础研究发展计划资助(2012CB723308)


Straight Chain Carboxyl-Functionalized Poly(Ester-Amide) Resins Toughened Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以己二酸、三乙二醇、尿素和顺酐为原料合成了直链端羧基聚酯酰胺树脂,并用其改性双酚A型环氧树脂。通过扫描电镜表征了环氧/酸酐固化体系冲击断面形貌,通过力学性能、差示扫描量热分析、热失重测试,探讨了聚酯酰胺树脂对环氧树脂性能的影响。结果表明,制得的聚酯酰胺树脂与环氧树脂形成了均相体系,改性环氧/酸酐固化体系韧性断裂特征明显;改性后环氧树脂固化速率和弯曲强度降低,热稳定性和冲击强度提高。当己二酸、三乙二醇、尿素和顺酐的摩尔比为10∶8∶2∶2时,聚酯酰胺树脂改性环氧/酸酐固化体系的冲击强度最高,为26.5 kJ/m2。

    Abstract:

    Straight chain carboxyl-functionalized poly(ester-amide) resins were synthesized with adipic acid, triethylene glycol, urea and maleic anhydride. Bisphenol A epoxy resin was modified with poly(ester-amide) resins. The impact fracture of epoxy/anhydride curing system was characterized by SEM. The influence of poly(ester-amide) resins on epoxy resin properties was studied by mechanical test, DSC and TG. The results show that homogeneous system is formed between poly(ester-amide) resin and epoxy resin, the characteristic of ductile fracture is obvious. The curing rate and flexural strength of modified epoxy/anhydride system decrease, the thermal stability and impact strength increase. When the mole ratio of adipic acid, triethylene glycol, urea and maleic anhydride is 10∶8∶2∶2, the impact strength of modified epoxy/anhydride system is the highest, reaching 26.5 kJ/m2.

    参考文献
    相似文献
    引证文献
引用本文

靳柯, 刘立柱, 张笑瑞, 李金凤, 朱兴松.直链端羧基聚酯酰胺树脂增韧改性环氧树脂[J].高分子材料科学与工程,2015,31(7):17-21. Ke Jin, Lizhu Liu, Xiaorui Zhang, Jinfeng Li, Xingsong Zhu. Straight Chain Carboxyl-Functionalized Poly(Ester-Amide) Resins Toughened Epoxy Resin[J]. Polymer Materials Science & Engineering,2015,31(7):17-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司