碳化硅对超高分子量聚乙烯摩擦磨损及力学性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Silicon Carbide on Wear and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过干、湿2种方法分别制备了超高分子量聚乙烯(UHMWPE)/碳化硅(SiC)复合材料,采用热重分析、扫描电镜、摩擦磨损测定等表征手段,研究了不同方法制备的复合材料中SiC粒子在UHMWPE基体中的分散情况,以及2种方法对复合材料摩擦磨损和力学性能的影响。结果表明,湿法制备的复合材料中SiC粒子在UHMWPE基体中分散均匀,团聚现象得到改善。在干摩擦条件下,湿法制备的UHMWPE/SiC复合材料的稳态摩擦系数最低,磨损率最小,UHMWPE的粘着磨损、磨粒磨损得到有效改善。湿法制备的复合材料力学性能优于干法。

    Abstract:

    Ultra high molecular weight polyethylene (UHMWPE)/silicon carbide (SiC) composite materials were prepared by dry and wet methods respectively. Thermogravimetric analysis (TGA), scanning electron microscope (SEM) and friction and wear characterization methods were used to characterize dispersion of SiC particles in the UHMWPE matrix and the effect of SiC particles on tribological and mechanical properties of composite materials. Results show that a homogenous dispersion of SiC is obtained from composite materials prepared via wet method. Under dry friction condition, UHMWPE/SiC composites prepared by wet method exhibit lower steady friction coefficient, wear rate and better mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

董淑强, 刘春林, 刘杰, 钱天语, 周开源.碳化硅对超高分子量聚乙烯摩擦磨损及力学性能的影响[J].高分子材料科学与工程,2015,31(7):69-74. Shuqiang Dong, Chunlin Liu, Jie Liu, Tianyu Qian, Kaiyuan Zhou. Effect of Silicon Carbide on Wear and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene[J]. Polymer Materials Science & Engineering,2015,31(7):69-74.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司