非共价键交联聚乙烯醇的热致型形状记忆性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21304065);山西省青年科技研究基金(201302012-1);高等学校科技创新项目基金(2013109)


Non-Covalent Cross-Linked Poly(Vinyl Alcohol) with Thermal-Responsive Shape-Memory Effect
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用冻融循环法制备具有热致型形状记忆效应的非共价键交联聚乙烯醇,研究了材料的热致型形状记忆行为,考察了聚合物浓度、冻融循环次数及溶剂种类对物理交联SM-PVA性能的影响。通过差示扫描量热分析、热失重分析、动态力学分析、力学性能测试、溶胀平衡测试及形状回复实验测试了不同样品的热力学性能及形状记忆性能。结果表明,所有样品都有很好的热稳定性;质量分数为15%PVA水溶液所制样品的形状回复性能最好;增加冻融循环次数可有效提高材料储能模量和拉伸强度;由于水分子起到增塑剂的作用,用水做溶剂所得样品形变回复率高,50 ℃可达75%。

    Abstract:

    Thermal-induced shape-memory polymers based on non-covalent cross-linked poly(vinyl alcohol) (SM-PVA) were prepared through freezing and thawing cycles (FTC). Thermal induced shape memory effect (SME) of prepared material was studied. The effect of polymer concentration, freezing-thawing cycles and types of solvent on the properties of physically cross-linked SM-PVA was studied. DSC, TGA, DMA, mechanical and swelling equilibrium tests and bending tests were carried out to study the thermal-mechanical properties and SME. The results show that fabricated materials possess good thermal stability; the samples prepared by 15 % PVA solution exhibit more excellent shape recovery compared with others prepared under the same conditions; increasing freezing-thawing cycles would help to improve storage modulus and tensile strength; moreover, when water acts as solvent, shape recovery ratio could rise up to 75% at 50 ℃ due to plasticizing effect of water molecules.

    参考文献
    相似文献
    引证文献
引用本文

白利秀, 雷霞, 宋震, 杜海燕, 梁镇海, 申迎华.非共价键交联聚乙烯醇的热致型形状记忆性能[J].高分子材料科学与工程,2015,31(7):75-80. Lixiu Bai, Xia Lei, Zhen Song, Haiyan Du, Zhenhai Liang, Yinghua Shen. Non-Covalent Cross-Linked Poly(Vinyl Alcohol) with Thermal-Responsive Shape-Memory Effect[J]. Polymer Materials Science & Engineering,2015,31(7):75-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司