紫外光老化TiO2/聚丙烯复合材料的热降解行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省高等学校矿业工程材料重点学科开放实验室开放资金资助(MEM12-12);国家级大学生创新创业训练计划项目[KG7](201210460017)


Thermal Degradation Behavior of TiO2/Polypropylene Composites After UV Aging
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融共混法制备了金红石型TiO2/聚丙烯(PP)复合材料,利用热失重分析和红外光谱研究了紫外光照射对PP和纳米TiO2/PP复合材料热稳定性的影响。结果表明,金红石型纳米TiO2加入到PP后,复合材料的起始降解温度(To) 较纯PP提高23 ℃,最大热降解温度(Tmd)保持不变,有效延缓热降解过程。紫外照射后,PP的起始降解温度(To)下降100 ℃,最大热降解速率(Rmd)提高了近5倍,热稳定性下降严重。红外光谱证实这是由于PP分子链的氧化、断裂所致。而TiO2/PP复合材料中紫外照射引起的To和Rmd改变很小,归因于纳米TiO2对紫外线的吸收作用,减少了对PP基体分子链的破坏。

    Abstract:

    Nano-rutile-TiO2/ polypropylene (PP) composites were prepared by melt blending, and the effects of UV ageing on the thermal stability of PP and nano-TiO2/PP composites were investigated by TG and FT-IR. The results show that the addition of nano-rutile-TiO2 could effectively delay thermal degradation process in PP and the onset temperature of thermal degradation(To) increases by 23 ℃, the temperature of maximum mass-loss rate(Tmd) keeps basically invariable. After UV ageing, the To of PP decreases by 100 ℃ and the peak thermal degradation rate(Rmd) rises nearly five times, the thermal stability declines seriously. The FT-IR confirms that the reasons are due to oxidation and fracture of the PP molecular chain. While the To and Rmd of nano-TiO2/PP composites show a small variation caused by UV ageing. The main reasons are that nano-TiO2 has strong function of absorbing UV light and reduces damage to the PP matrix molecular chain.

    参考文献
    相似文献
    引证文献
引用本文

贺超峰, 曹新鑫, 孙得翔, 彭苗, 李杰飞.紫外光老化TiO2/聚丙烯复合材料的热降解行为[J].高分子材料科学与工程,2015,31(7):92-95. Chaofeng He, Xinxin Cao, Dexiang Sun, Miao Peng, Jiefei Li. Thermal Degradation Behavior of TiO2/Polypropylene Composites After UV Aging[J]. Polymer Materials Science & Engineering,2015,31(7):92-95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司