Abstract:The definition of Poisson′s ratio was extended from small deformation and linear elasticity to large deformation and hyperelasticity. A reasonable strain measure was determined to describe Poisson′s ratio and volume strain. Simple tensile tests were conducted on carbon-black filled rubber samples with various filler contents to investigate the effect of tensile deformation on the Poisson′s ratio and volume strain. The results show that, in the case of large deformation, Hencky strain is the unique reasonable strain measure to represent the incompressibility of material. The Poisson′s ratio and volume strain are deformation dependent. There exists a critical strain, below which the Poisson′s ratio of the carbon-black filled rubber is equal to 0.5, representing the incompressibility, however, when the Hencky strain is great than the critical value, the Poisson′s ratio decreases linearly with increase in tensile deformation, the higher the filler content, the larger the descending speed. Correspondingly, the volume strain increases with increase in tensile deformation and should not be neglected. In addition, the critical strain dependents on the filler content, higher filler content causes smaller critical strain.