同向非对称双螺杆挤出高密度聚乙烯/聚苯乙烯共混体系熔融机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11272093);广东省高等职业院校珠江学者岗位计划资助项目(2012);广东省部产学研项目(2012B091100432)


Melting Mechanisms of High Density Polyethylene/Polystyrene in Co-Rotating Non-Twin Screws Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    借助于自主研制转速比为2的剖分式同向非对称双螺杆挤出机对高密度聚乙烯(HDPE)/ 聚苯乙烯(PS)共混体系的熔融混合过程进行了沿程取样研究,并比较不同螺纹元件螺距和操作条件对熔融过程的影响,对熔融过程沿挤出方向的相形态变化进行初步分析。实验表明,大部分物料在第1加热区发生塑性变形,单头螺杆固体输送区的充满度比双头螺杆的高且HDPE首先发生熔融,左右螺槽的拉伸和压缩作用和对应螺纹元件螺距的不一致性使物料更快形成海岛熔融模型,HDPE/PS在耗散混合熔融和粘性耗散熔融机理下快速熔融;减少螺纹元件螺距可以加快熔融速率,缩短熔融长度。

    Abstract:

    With a self-developed co-rotating non-twin screws extruder, of which screws rotate is at the speed ratio of 2, and the clam-shell split barrel, the melting and mixing process of HDPE/PS blend were investigated by removing the carcasses along the screws. And the effects of different pitch of screw elements and operational conditions on the melting process were investigated. The morphology development along the extrusion direction was preliminarily analyzed. The results show that most materials are deformed in the first heating zone, and the degree of fill in one-tip screw is higher than that in two-tip screw, and HDPE material is found to be melted firstly. The effect of expansion and compression in two screws grooves and the inconsistency of pitch of screw elements make the island-sea melting model fast form, HDPE/PS blend is efficiently melted under the dissipative mixing melting and viscous dissipation melting mechanisms. Reducing the pitch of screw elements can accelerate the melting rate and make the melting length become shorter.

    参考文献
    相似文献
    引证文献
引用本文

罗家胜, 喻慧文, 杜遥雪, 王玫瑰, 徐百平.同向非对称双螺杆挤出高密度聚乙烯/聚苯乙烯共混体系熔融机理[J].高分子材料科学与工程,2015,31(7):107-113. Jiasheng Luo, Huiwen Yu, Yaoxue Du, Meigui Wang, Baiping Xu. Melting Mechanisms of High Density Polyethylene/Polystyrene in Co-Rotating Non-Twin Screws Extrusion[J]. Polymer Materials Science & Engineering,2015,31(7):107-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司