Abstract:Membrane separation technology is a highly efficient and low cost method for treating oily wastewater. The membranes used in oil/water separation require the material to be good in hydrophilicity as well as membrane forming properties and mechanical strength, so modification of the membrane is required. In this work, polyvinylidene fluoride (PVDF) material was first grafted with acrylic acid side chains, then hollow fiber membranes were prepared by dry-wet spinning using the modified material, and the effect of membrane preparing conditions was studied. The results show that the resulted membrane has low water contact angle (<50°), high flux (>400 L·m-2·h-1) and high kerosene retention (>95%). Higher casting solution concentration, higher extrusion pressure and addition of solvent in the coagulation bath lead to lower water flux and higher kerosene retention.