光交联SbQ/蒙脱土插层复合材料的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术研究发展计划(863)资助项目(2012AA030313); 国家自然科学基金资助项目(51006046,51163014)


Synthesis and Characterization of Cross-Linked SbQ/Montmorillonite Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将苯乙烯吡啶盐(SbQ)与钠基蒙脱土(Na-MMT)通过阳离子交换的方法制得SbQ/MMT复合材料,并采用紫外光聚合法制备光交联SbQ/MMT复合材料。利用透射电镜和X射线衍射表征了SbQ/MMT复合材料的插层结构,结果表明,SbQ插层蒙脱土后层间距明显增大,X射线衍射显示层间距由1.24 nm增大到1.54 nm。采用扫描电镜对其形貌进行了分析,紫外分光光度计测试表明随着紫外照射时间延长,SbQ交联程度增大,傅里叶变换红外光谱仪分析说明SbQ已插入蒙脱土片层结构中。

    Abstract:

    Styrylpyridinium (SbQ)/montmorillonite (MMT) composites were prepared via cationic exchange interactions between styrylpyridinium species (specifically SbQ) and MMT platelets. The SbQ/MMT solutions were irradiated under UV for specific time to obtain the cross-linked SbQ/MMT materials. The analysis of TEM and XRD were used to indicate the microstructure of SbQ/MMT nanocomposites. It shows that the basal spacing is increased from 1.24 nm to 1.53 nm compared with the pristine MMT, which proves that SbQ have interacted with MMT. The structure and morphology of MMT and modified MMT were studied by SEM. UV spectra test demonstrates that with increase of UV irradiation, the cross-linking degree of SbQ increases. Fourier transform infrared spectroscopy was conducted to show that SbQ is inserted into the layers structure of MMT.

    参考文献
    相似文献
    引证文献
引用本文

崔静, 王清清, 魏取福.光交联SbQ/蒙脱土插层复合材料的制备及表征[J].高分子材料科学与工程,2015,31(7):159-162. Jing Cui, Qingqing Wang, Qufu Wei. Synthesis and Characterization of Cross-Linked SbQ/Montmorillonite Composites[J]. Polymer Materials Science & Engineering,2015,31(7):159-162.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-07-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司