Cellulose-g-PCL两亲性聚合物的合成表征及自组装行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31170554);大连工业大学青年基金(28000123);制浆造纸科学与技术教育部重点实验室开放基金(08031338);辽宁省大学生创新创业训练计划项目(201410152028)


Synthesis, Characterization and Self-Assembly Behavior of Cellulose-g-PCL Amphiphilic Copolymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在离子液体1-丁基-3-甲基咪唑氯盐(BmimCl)中,通过羟基与单体ε-己内酯之间的开环接枝聚合反应(ROP),制备Cellulose-g-PCL两亲性衍生物,利用红外光谱、核磁共振、X射线衍射、热重分析等技术对其结构和性能进行表征。通过改变催化剂种类和单体用量调节聚合物分子内疏水/疏水基团比例。荧光探针、透射电镜和动态光散射分析结果表明,Cellulose-g-PCL聚合物在水相中可自组装形成均一球形胶束,粒径位于纳米尺度范围内(30~130 nm),聚合物临界胶束浓度(CMC)较低(9.42~83.43 μg/mL)。胶束粒径和CMC值均随聚己内酯的接枝率增加而降低。

    Abstract:

    Self-associating cellulose-graft-poly(ε-caprolactone)(cellulose-g-PCL) copolymers were successfully synthesized via ring-opening polymerization (ROP) between ε-CL and hydroxyl groups in ionic liquid 1-N-butyl-3-methylimidazolium chloride (BmimCl). Their structural and physical properties were characterized by FT-IR, NMR, XRD and TGA. By controlling the catalyst categories and ε-CL feed ratios, molecular architecture of these copolymers can be altered. As evidenced by analysis of fluorescence probe, dynamic light scattering (DLS) and TEM, these copolymers could self-assemble into spherical-like micelles in water. The size of micelles is ranged from 30 nm to 130 nm, and critical micelle concentration (CMC) is very low (9.42~83.43 μg/mL). The CMC values and micelle sizes can be controlled by varying the grafting ratio of PCL.

    参考文献
    相似文献
    引证文献
引用本文

郭延柱, 张丽, 王兴, 韩颖, 周景辉. Cellulose-g-PCL两亲性聚合物的合成表征及自组装行为[J].高分子材料科学与工程,2015,31(8):16-21. Yanzhu Guo, Li Zhang, Xing Wang, Ying Han, Jinghui Zhou. Synthesis, Characterization and Self-Assembly Behavior of Cellulose-g-PCL Amphiphilic Copolymers[J]. Polymer Materials Science & Engineering,2015,31(8):16-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司