Abstract:The polydimethylsiloxane (PDMS) was first prepared by cationic emulsion polymerization, which was further used to form a silicone rubber-modified silica sol emulsion using tetraethoxysilane (TEOS) as coupling agent and silica sol as reinforcing agent. 1H-NMR and GPC analysis of the synthesized PDMS show that the average molecular weight is around 27000 and polydispersity index is 1.35. The microstructure of the silicone rubber emulsion was further characterized by TEM. The morphology of composite films was analyzed by SEM. Besides, the effects of usages of TEOS and silica sol on particle sizes and particle size distributions of the emulsion were also investigated, as well as the mechanical properties and crosslinking density of the composite films. The results show that as increasing content of TEOS and silica sol, the latex particle and wider particle size distribution of emulsion increase with, as well as an enhancing tense strength, Shore-A hardness, and decreasing broken elongation ratio of the films. The optimum to obtain the silicone rubber-modified silica sol emulsion with comprehensive performance is at the content ratio of w(TEOS)=2.0%, w(silica sol)= 20%.