纤维含量和取向对碳纤维/丁腈橡胶复合材料拉伸和摩擦性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

全军后勤科研重点项目


Tensile and Friction Properties of Carbon Fiber/Nitrile Rubber Composites: Influence of Carbon Fiber Content and Orientation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用双辊开炼机的压延效应,提高了短切碳纤维/丁腈橡胶中碳纤维的取向度,并对不同碳纤维取向和含量的复合材料的拉伸强度、邵尔硬度、阿克隆磨耗及摩擦系数等性能进行考察。结果表明,随着短切碳纤维的增加,不同碳纤维取向的橡胶复合材料的拉伸强度和拉断伸长率下降,硬度提高,而且平行取向的碳纤维橡胶复合材料拉伸性能较好;随着碳纤维含量的增加,平行取向的碳纤维橡胶复合材料的阿克隆磨耗增加,摩擦系数减小;而随机取向、垂直取向的碳纤维橡胶复合材料阿克隆磨耗先下降后增加,摩擦系数先增加后减小。

    Abstract:

    The mechanical properties of composite materials consisting of nitrilebutadiene rubber (NBR) reinforced with short carbon fiber (CF) were tested and analyzed. The SEM morphologies indicate that the orientation degree of CF could be improved by two roll milling. With the increase of CF content, the tensile strength and elongation at break decrease, Shore A hardness increases, and the parallel orientation composites have better tensile properties than free orientation and plumb orientation composites. And with the increase of CF content, the Akron abrasion loss of plumb orientation composites increases, the friction coefficient decreases. The Akron loss decreases first and then increases, and the friction coefficient increases first and then decreases with the growing of CF content of free orientation and plumb orientation composite.

    参考文献
    相似文献
    引证文献
引用本文

王修行, 张建春, 张华, 秦蕾.纤维含量和取向对碳纤维/丁腈橡胶复合材料拉伸和摩擦性能的影响[J].高分子材料科学与工程,2015,31(8):92-95. Xiuxing Wang, Jianchun Zhang, Hua Zhang, Lei Qin. Tensile and Friction Properties of Carbon Fiber/Nitrile Rubber Composites: Influence of Carbon Fiber Content and Orientation[J]. Polymer Materials Science & Engineering,2015,31(8):92-95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司