多层复合聚乳酸薄膜的阻隔性和力学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

留学回国人员科研启动基金(46);国家自然科学基金资助项目(51163010)


Barrier and Mechanical Properties of Poly(L-Lactide) Multilayer Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将聚乙烯醇(PVA)作为中间层与聚乳酸(PLLA)复合,制备生物可降解三层复合膜,以提高PLLA薄膜的阻隔性。通过测试PLLA复合膜的热学性质、力学性能、氧气阻隔性和水蒸气阻隔性,分析了三层复合膜的包装特性。结果表明,当PVA层占复合膜的比例为10%时,PLLA/PVA/PLLA的氧气透过率(OTR)值为1.01 cm3/m2·d,阻氧性提高了近110倍。且中间层占复合膜比例越大,阻隔性提高越明显。同时,PVA中间层也增强了PLLA复合膜的强度、韧性和刚性。

    Abstract:

    Poly(L-Lactide) (PLLA) and poly(vinly alcohol) (PVA) were used to prepare biodegradable three-layer PPC/PVA/PPC films with high barrier and tensile properties, and its thermostability, mechanical and barrier properties were evaluated respectively. A small oxygen transmission rate of 1.01 cm3/m2·d is observed for the PLLA/PVA(10%)/PLLA film, showing that the oxygen barrier property of the PLLA film is enhanced by almost 110 times. With increasing the PVA concentration, the higher barrier property of the films is obtained. Meanwhile, the mechanical properties of the multilayer films are enhanced obviously.

    参考文献
    相似文献
    引证文献
引用本文

董同力嘎, 王爽爽, 孙文秀, 成培芳, 靳烨.多层复合聚乳酸薄膜的阻隔性和力学性能[J].高分子材料科学与工程,2015,31(8):177-181. Tungalag Dong, Shuangshuang Wang, Wenxiu Sun, Peifang Cheng, Ye Jin. Barrier and Mechanical Properties of Poly(L-Lactide) Multilayer Films[J]. Polymer Materials Science & Engineering,2015,31(8):177-181.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司