纳米石墨微片/聚氨酯/环氧复合材料的制备及结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273118)


Preparation and Properties of Polyurethane/Epoxy Composites Modified with Graphite Nanosheets
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用分步法成功制备了纳米石墨微片/聚氨酯/环氧复合体系。通过扫描电镜观察了纳米石墨微片在复合体系中的分散情况;力学性能的测试结果表明,当改性纳米石墨微片添加量为0.25%,其拉伸强度达到60 MPa,比未添加纳米石墨微片体系提高了36.7%,弯曲强度为93.1 MPa,增加了59.4%;当改性纳米石墨微片添加量为4%时,拉伸模量为2672MPa,提高了73.1%,弯曲模量达到2470 MPa,比纯体系增加了76.1%;动态力学分析结果表明,加入改性纳米石墨微片(GNS)后,复合体系的玻璃化转变温度及阻尼温域均增加,GNS质量分数为2%时,其阻尼温域达到最大。

    Abstract:

    The graphite nanosheets (GNS) modified polyurethane (PU) /epoxy resin (EP) composites were successfully prepared through sequential polymerization. The dispersion of GNS in composites was characterized by scanning electron microscope (SEM). The mechanical properties of composites show that the maximum of tensile strength and tensile modulus achieves to 60 MPa and 93.1 MPa respectively when the addition of GNS is 0.25%. Compared to the neat system, the tensile modulus and flexural strength of PU/EP composite with 4% GNS are increased by 73.1%, and 76.1% respectively. With the introduction of modified GNS, the composites have higher Tg and wider damping temperature range than pure EP/PU composite. The maximum of damping temperature range is obtained at the modified GNS content of 2%.

    参考文献
    相似文献
    引证文献
引用本文

黄强, 李茂源, 洪义强, 邹华维, 梁梅, 陈洋.纳米石墨微片/聚氨酯/环氧复合材料的制备及结构与性能[J].高分子材料科学与工程,2015,31(8):182-184. Qiang Huang, Maoyuan Li, Yiqiang Hong, Huawei Zou, Mei Liang, Yang Chen. Preparation and Properties of Polyurethane/Epoxy Composites Modified with Graphite Nanosheets[J]. Polymer Materials Science & Engineering,2015,31(8):182-184.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司