环保型阻燃含氟水性聚氨酯的设计合成及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21176128)(51172116);青岛市国际科技合作资助项目(ZR2010BL022)


Design, Synthesis and Properties of Environmentally Friendly Flame Retardant and Fluorinated Waterborne Polyurethane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过铜催化的偶极环加成反应,采用短链2-叠氮乙酸全氟己基乙醇酯(Rf-N3)对端炔基功能化水性聚氨酯(WPU)进行接枝改性,利用WPU侧链保留的炔基高温热交联成炭机理赋予WPU阻燃性,制备了一种环保型阻燃含氟WPU,并对其结构进行了表征;研究了Rf-N3和WPU中炔基含量对改性WPU膜表面性能、热降解行为和动态燃烧性能的影响。研究结果表明,当Rf-N3含量从0%增大到30%,WPU膜的水接触角从61°增大到108°,残炭率从0.3%激增到25%,峰值热释放速率从700 kW/m2下降到523 kW/m2,峰值生烟速率从0.083 m2/s降低到0.0495 m2/s,并提出了可能的热降解机理。

    Abstract:

    Grafting modification of the alkyne-functionalized WPU was conducted via the Cu(I)-mediated cycloaddition with short-chain 2-azido acetic acid perfluorohexyl ethyl ester (Rf-N3). Environmentally friendly flame retardant and fluorinated WPU was fabricated based on char-forming mechanism of unreacted pendant alkyne groups at high temperatures, and its structure was confirmed. The influence of the grafting amount of Rf-N3 and alkyne groups on surface properties, thermal degradation and dynamic combustion properties of functionalized WPU films was studied. The results show that when the Rf-N3 content increases from 0% to 30%, the contact angle of WPU film increases from 61° to 108°, the char yield increases from 0.3% to 25% and the PHRR and SPR decrease from 700 kW/m2 to 523 kW/m2, and from 0.083 m2/s down to 0.0495 m2/s respectively. Moreover thermal degradation mechanism of WPU films was also proposed.

    参考文献
    相似文献
    引证文献
引用本文

李兴建, 杨子江, 孙道兴, 张宜恒.环保型阻燃含氟水性聚氨酯的设计合成及性能[J].高分子材料科学与工程,2015,31(9):17-22. Xingjian Li, Zijiang Yang, Daoxing Sun, Yiheng Zhang. Design, Synthesis and Properties of Environmentally Friendly Flame Retardant and Fluorinated Waterborne Polyurethane[J]. Polymer Materials Science & Engineering,2015,31(9):17-22.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司