倍半硅氧烷改性氟代聚丙烯酸酯树脂的合成及疏水性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省科技厅13115重大科技专项项目(2010ZDKG-35);陕西省教育厅产业化培育项目(2011JG25);陕西省轻化工助剂重点实验室项目(12JS017)


Synthesis and Hydrophobicity of Fluorinated Polyacrylate Modified with Silsesquioxane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过溶液聚合法,将甲基丙烯酸十二氟庚酯(G04)与烯丙基缩水甘油醚(AGE)、(甲基)丙烯酸酯类单体共聚,合成了一种含有环氧基的氟代聚丙烯酸酯(FBSA),用红外光谱仪、原子力显微镜、扫描电镜等对其结构及膜形貌进行了研究。结果表明,在观察高度为5 nm,扫描范围为1 μm×1 μm条件下,FBSA微观上表现出一种相分离结构,其表面有众多凸起峰状物存在。将其与KH792水解缩聚物上的氨基开环交联,并添加纳米TiO2制得氟硅共改性的聚丙烯酸酯涂料,涂膜表面的水接触角达到125°。

    Abstract:

    By solution polymerization, a group-containing epoxy fluorinated polyacrylate (FBSA) was synthesized with dodecafluoroheptyl methacrylate (G04), allyl glycidyl ether (AGE) and (meth) acrylic acid ester monomers. Chemical structure of FBSA was characterized by infrared spectrum(IR) and 1H nuclear magnetic resonance spectrum (1H-NMR), then film morphology and performance of FBSA were investigated by atomic force microscope(AFM), scanning electron microscope (SEM) and so on. The results indicate that at scale data of 5 nm and in the scanning field of 1 μm×1 μm, the FBSA shows phase-separated micro-morphology on a silicon wafer substrate, and there are many mountains on the FBSA film surface. When cross linked with the amino group of KH-792 hydrolytic condensation polymer by ring opening, FBSA is made into fluorosilicone co-modified polyacrylate coating, and obtaining nano-TiO2, can let the coating surface with a water contact angle of 125°.

    参考文献
    相似文献
    引证文献
引用本文

潘家炎, 安秋凤, 张艳丽.倍半硅氧烷改性氟代聚丙烯酸酯树脂的合成及疏水性能[J].高分子材料科学与工程,2015,31(9):42-48. Jiayan Pan, Qiufeng An, Yanli Zhang. Synthesis and Hydrophobicity of Fluorinated Polyacrylate Modified with Silsesquioxane[J]. Polymer Materials Science & Engineering,2015,31(9):42-48.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司