悬浮聚合法制备热膨胀聚(偏氯乙烯丙烯腈苯乙烯) 微球及其性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省自然科学基金资助项目(ZR2013EMM004),济南市高校院所自主创新计划(201402044)


Preparation and Properties of Thermal-Expandable Microspheres with P(VDC-AN-St) Shell by Suspension Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用苯乙烯(St)、丙烯腈(AN)、偏二氯乙烯(VDC)为单体,异丁烷为起泡剂,通过悬浮聚合法制备热膨胀微球(TEMs),研究了低毒性的非腈基单体特别是苯乙烯的用量对微球膨胀性能的影响。结果表明,当AN质量分数为30%~40%、St为30%~35%、VDC为30%~40%时,所制备的TEMs具有较好的膨胀性能。微球的平均粒径约为15 μm,最大膨胀倍数约为20。微观形态证明微球具有核/壳结构,热失重分析(TGA)表明起泡剂在微球中的质量分数约为17%~19%。微球的初始膨胀温度(Toe)、最大膨胀温度(Tme)和萎缩温度(Tos)随着VDC在单体中所占比例的增加而降低。

    Abstract:

    Thermal-expandable microspheres (TEMs) with core/shell structure were prepared via suspension polymerization using vinylidene chloride (VDC), acrylonitrile (AN), styrene (St) as monomers and i-butane as blowing agent. The influence of hypotoxic non-nitrile-containing monomer, styrene, on the expansion property of TEMs was studied. At the monomers mass fraction of 30%~40% AN,30%~35% St,30%~40% VDC, the synthesized microspheres have good expansion properties. The maximum expansion volume (Vmr) is about 20 times of original volume, and the average particles diameter is about 15 μm. The core/shell structure of microspheres was demonstrated by polarized micrographs. The results of thermogravimetric analysis (TGA) show that the blowing agent content in microspheres is about 17%. The Tme, Toe and Tos of TEMs decrease with the increasing of VDC content.

    参考文献
    相似文献
    引证文献
引用本文

侯昭升, 张浩, 纪晨旭, 张冬梅, 曲文强, 孙斌.悬浮聚合法制备热膨胀聚(偏氯乙烯丙烯腈苯乙烯) 微球及其性能[J].高分子材料科学与工程,2015,31(9):49-52. Zhaosheng Hou, Hao Zhang, Chenxu Ji, Dongmei Zhang, Wenqiang Qu, Bin Sun. Preparation and Properties of Thermal-Expandable Microspheres with P(VDC-AN-St) Shell by Suspension Polymerization[J]. Polymer Materials Science & Engineering,2015,31(9):49-52.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-09-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司